Perfect pass pro

I have PP Digital Pro on my 94 SNOB with carburated PCM Pro Boss. Engine is supposed to make 285-300 HP.

It works great. We slalom mostly but have used the wakeboard speed mode which works well also.

I bought it and installed it myself. The hardest part was drilling a hole in the bottom of the boat for the paddlwheel. Drilling the hole was easy, convincing myself to do it was the hard part. You only need the paddlwheel for the speed based modes. Slalom only is RPM and doesn't use the paddlewheel so no hole.

I don't know if you'd have problems with lower HP engines, but I wouldn't think so. Email perfect pass and ask about your specific application. Or check with http://www.h2osmosis.com. They sold me my system and were very helpful.

If you have even a small amount of mechanical aptitude you can install the system in 2-3 hours.

Woody, As I mentioned earlier, powerup must come after startup but before putting in gear. As long as you do this it'll work fine and you will be pleased with the investment. Doing a good install is important too. If you have a stiff throttle cable that will impact operation of the P/P. You need to check your throttle system over good before you install it, making the necessary repairs.
I had a friend drive my boat about 4 years ago right after I install my P/P system. He powered it up in cruise, and engaged it, and it was somewhat erratic. I didn't know what was happening. He laughed at me and told me it was a piece of sh!t. I was so upset I called the P/P rep up in Canada. That's when I was told the power up is critical. No more problems since.

I told ya you'd love it! Best mod I did to my boat for sure!