Props For Sale

I have 2 props for sale.

1st - 13x12 RH 1"

2nd - 13x13 RH 1" just got back from prop shop put back to exact spec. have sheet with all numbers.

Make offer or trade I am looking for same but in a LH

Thanks

Jason
jshankleton@gmail.com

Your sky pole is it a stand alone model or does it mount over an existing pylon?

Thanks

Jason

ros12705 wrote: I have a 1983 A/SKIER with a 351 ford Winsor motor 18 footer,,, this is my first inboard boat so i am learning.... the prop i have has 3 blades and it pushes around 35-40 mph. rpms around 38... the boat cavatates about 3/4 throtle and around the 3800 rpm....Question what prop should i get to go a little faster with out hurting the trans.... and will one of your props work... I have some $$$$ thanks Mike Ross and a ski pole.

Mike,
You had better check to see if your A/S is a RH engine/prop. I've got a feeling it's a LH so the RH's above won't work.

Speed won't hurt the trans.

OK , just checked .....looking foward the prop turns to the L side....,,,I never new... R or L spinning props..... SO I NEED A L PROP...how do i figure out the pitch.. or the faster prop... or do i have the prop for me......like to get the biggest wake for surfing and air... LIKE speed TO GET TO THE ISLAND SAND BARS FOR HAPPY HOUR, (CANT WAIT) but i am useing this boat on the indian river,,, E-COAST CENTRAL FLA.. some BOAT/WIND wake,,,, but alot of good flat water.....SALTT. THIS THE ONLY INBOARD BOAT I HAVE SEEN SINCE LIVING HERE ON THIS RIVER...PEOPLE LOOK AND DONT KNOW WHAT THIS BOAT IS.... LIKE ALIENS.. TOWER/// HOT WOMEN/// BIG AIR/// VERY LOAD SOUNDS.. THE BEST BEHIND SURFING I HAVE EVER SEEN..... LIKE THE DRUNK X-GAMES.. AND LOVE LOVE IT... SO WHAT PROP WOUL BUY$$$$$$ THANKS Mike

What is the condition of your current prop? Any dings, even things that may seem small, can play a big part in how well a prop is balanced and the grip it gets in the water. You will likely notice a drop in speed or increase in vibrations from bent or chipped blades on your prop.

You should be able to find the size of the current prop if you take off the prop nut.....the size is usually stamped into the hub of the prop and will look something like 13X13.

I am asking $300.00 + frt