Foam

Trevor,
I did the foam thing 11 years ago on my Mustang. At the time the only product I could find was called "Mountains in Minutes". It's used by model railroaders to create foam mountains and landscapes. I was able to buy it in 1 gallon cans (2 parts) and we used about 4 or 5 sets of the stuff (8 to 10 gallons). There's a lot of waste that gets cut away. I just tried a search on Yahoo and nothing showed up...it may not be available anymore, I don't know. I know it was expensive stuff back then.
Jeff at CC told me that the key was to use a 'closed cell' foam. The spray foam you get in a can at Home Cheap-o' is not closed cell and not recommended.
Also, invest in plenty of latex gloves and a good resperator mask!!!
Good luck.

Rbest,
I don't know if Trevor took pictures, but I did; lots of them. I have to find them and scan them into my computer to share with everyone.
Do you have any pictures of that SS?

I've got a couple of me putting the 351 in. I am far from being done.

trevor,i have not put the foam in yet i figured on 4 sets,= 8 gl .when you check www.john greer website you'll see it's cheaper just to order 5gl part a and 5gl part b . i removed ALL the foam in mine,up in front it's almost 3' thick.only yhe lowest part at the keel was wet ,but as i was digging it out i ran into a nest of little black hungry piss ants.sooo..all the foam,and ants are gone

sorry about that trev,it's www.jgreer.com