help fiberglass mains

Hi,
I have almost finished with secondary's Looks ok, but I would like the mains to be perfect, The main question is Is it better to go ahead and put all the wood in before I start wrapping the mains, Like the bulkheads and the standoffs for the motor cradle and the floor support for the rear deck. Or should I wrap the bottoms or work around the whole stinger. I am clueless right now Picture of the ribs and secondary some small bubbling, but after reading one other post I am doing much better. If anyone would like to give me a call I would be more than happy to listen 352-361-8068
Thanks Mike

With structural wood stringers like you have gone with, what Pete suggests will work fine..

if you were trying to accomplish structure with glass I would tell you long uninterupted lengths of glass should first be put down the length of the stringers before adding the bulk heads.

So = I am not really adding to this thread.. just making sure anyone who reads it later understands the difference..