Carb Issues |
Post Reply |
Author | |
MY70/81
Newbie Joined: January-31-2006 Location: United States Status: Offline Points: 24 |
Post Options
Thanks(0)
Posted: August-21-2006 at 8:58am |
I am looking for some advice on my 81 SN. I have spent my summer sorting out several problems left to me by the PO, and I believe I am pretty close to having it right. I have a nagging problem with the idle on my 351, so far this is what I have done, set Timing to 6 degrees BTC, adjusted Points, Plugs, Rebuilt Carb and set everything to rebuild specs, I also previously replaced one Piston, and the Lt side Head. I am having a lot of problems getting it to idle until completely warmed up, and it has a slight stumble pulling from a stop. I have read some posts that say the Timing should be 8-10 degrees? I am kind of new to the 351, because my 70 SN has the 318 in it.
|
|
GottaSki
Grand Poobah Joined: April-21-2005 Location: NE CT Status: Offline Points: 3363 |
Post Options
Thanks(0)
|
Yes, 8-10 is best. Also set your air screws when idling in gear. Off-idle will improve.
Make certain there is noi slop in the accel pump linkage, too. You make have a vacuum leak too. |
|
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |