Piano hinge |
Post Reply |
Author | |
Oletela
Senior Member Joined: March-12-2012 Location: Lewisville, Tx Status: Offline Points: 166 |
Post Options
Thanks(0)
Posted: February-25-2013 at 5:47pm |
Going to be putting my interior back together tonight on my 89' with deluxe interior. My observer seat brackets are broken and I want to update it to the new style with hinge and gas shock. Has anybody done this conversion and have any pictures of it?
|
|
Hollywood
Moderator Group Joined: February-04-2004 Location: Twin Lakes, WI Status: Offline Points: 13514 |
Post Options
Thanks(0)
|
I have not seen it done but have thought about it myself. Were you not able to get the original style hinges from Zach?
|
|
Oletela
Senior Member Joined: March-12-2012 Location: Lewisville, Tx Status: Offline Points: 166 |
Post Options
Thanks(0)
|
I haven't talked to him but if anything ill fab up some new brackets, but for the time it would take to do that I would rather update it to be more user friendly. Just wanted to see if anybody else has done it
|
|
bhectus
Platinum Member Joined: July-04-2010 Location: Gator Country! Status: Offline Points: 1809 |
Post Options
Thanks(0)
|
Pretty cool idea and it would open it up a little more to be able to get in to the bow area. Do it and post pics! :)
|
|
'02 Ski Nautique 196 w/ 5.7 Apex bowtie - Sold
'87 Barefoot - sold '97 Super Sport Nautique - originally custom built for Walt Meloon '97 Ski Nautique '83 SN 2001 |
|
Waternut
Senior Member Joined: July-11-2012 Location: Macon, GA Status: Offline Points: 292 |
Post Options
Thanks(0)
|
Aren't most of the newer boats like that? Could've sworn a friends 98 SN was like that.
|
|
lewy2001
Grand Poobah Joined: March-19-2008 Location: NSW Australia Status: Offline Points: 2234 |
Post Options
Thanks(0)
|
The hinge on the 89 is a PIA. There is a lot more involved than just a piano hinge and a couple of struts to make it function like the latter models.
The 89's plastic seat base is fixed to the floor and the cushion sits on that. The back has that PIA of a hinge and is not designed to handle the weight if you tried to hinge the entire seat from it. You would need to almost redesign the whole seat to make it hinge up like the latter observer seats. In the end I just removed the hinge and made a slide in setup for the seat back so it could be removed totally when access was required to under bow storage. I think I may have my old hinge around somewhere if you can not locate one elsewhere. |
|
If you're going through hell, keep going
89 Ski <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=5685" ta |
|
phatsat67
Grand Poobah Joined: March-13-2006 Location: Indiana Status: Offline Points: 6157 |
Post Options
Thanks(0)
|
I've always thought that would have been a great upgrade. I would like a newer style interior in my boat. Maybe I should just buy a newer 196 and keep mine original. Haha.
|
|
Oletela
Senior Member Joined: March-12-2012 Location: Lewisville, Tx Status: Offline Points: 166 |
Post Options
Thanks(0)
|
I was thinking I could prob make it work with some struts but now that you say that I'm not sure. But the sliding frame sounds like alot better idea, do you have any pics? |
|
lewy2001
Grand Poobah Joined: March-19-2008 Location: NSW Australia Status: Offline Points: 2234 |
Post Options
Thanks(0)
|
These pics were the prototype just to see if it would hold the seat back in place securely. Updated later with some more waterproof spacing material instead of ply and countersunk screws so they would not rub on dash gel.
|
|
If you're going through hell, keep going
89 Ski <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=5685" ta |
|
Oletela
Senior Member Joined: March-12-2012 Location: Lewisville, Tx Status: Offline Points: 166 |
Post Options
Thanks(0)
|
Now that is an easier way to do it!
The back stay on there pretty stable? |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |