1987 Ski Nautique

Thanks to everyone who has asked about parts.
I've been trying to touch base via pm's and keep everything strait and fair.
I've been busy on the tear down and I am almost done, if I haven't touched base with people, it's most likely I'm waiting on a response as well.

Thanks again,

John

How much for the observer seat? I am needing one badly!

PM me about the steering wheel.

I'm interested in the steering box, steering cable, mirror, glove box and a couple other little things!
Thanks Zack

Observer seat available

I know you mentioned speedo's you're keeping, what about pitot's? If pitots go I think I can take them.

Nathan, I deliberated and knew that the question might come up......
But felt it would be best sold as parts to help keep other boats on the water.

Adam, what do do think gut it, build a grill into the stern, fill the body with ice and beer,(that center drain would work well!), put a sound system under the front deck and replace the windshield with a couple of flat screens, leave it on the trailer and tow it to all the CCF functions!

Looking for a strut 6a6 and possibly a shaft 1x41

if you're parting it out you know we're gonna peer pressure you into turning the hull into a bar, right?

I will pull and check the horn and I don't know if the light is there but will look, you want the base as well?
That pouch is pretty cool, I looked in my blue '87 and yep there are the three snaps! Guess I will put that on my wish list!

Ok, this followed me home the other day.......
[/IMG
It's actually not bad and is complete as far as I can tell. However this is a classic case of boat abuse.... Story is the first owner had something go wrong with the engine and tore it apart, didn't figure out the problem got. Frustrated and just left it, withe the engine cover up for several years thus trashing the block and other components.

Next owner got it as money owed and kind of covered it for the next couple of years.

So now it's mine and I think the best thing to do is part it out, the floors are spongy and rotten, the stringers sound very hollow, so I'm sure a complete stringer job would be in order.
So now it's parts, I'm going to start disassembly this weekend and will post up parts as I can.
If you need anything, feel free to PM me and well make a deal.
As of right now the things not available are the trailer and the speedos.
With 3 Correct Crafts in the back yard, It's starting to look like some of the other famous northeast family's boat yards!

Thanks, John.