1987 Ski Nautique

Graham, I'm sooooo glad it made it to you! My first ever experience shipping over seas! Looking forward to some pics of my parts in your boat!

Jeff, sorry but the steering cable in the donor '87 is no good.

Thanks,
John

Do u still have the Steering cable

Is the Volt gauge available?

hello need 1 lifting eye/engine cradle??how much?also how wide is cradle?

Cc only out the battery under the seat in the (narrow) 16' boats... But they stopped doing that in the mid 70's.

I was under the impression that '80 was the only year that used the plywood pedestal with the newer style seat frames and tracks. That was definitely the case on the SN, as they went to the fiberglass pedestal in '81. I can't imagine they would have gone to the trouble of making wood versions after they had the ability to make them with glass, so my guess is that even the budget Tique would have had one in '82. Either way, the frames being used by that point are not meant to mount directly to the floor. That pedestal was the same 81-92.

That is the entire seat support in the 87's, there nothing under it except the floor. It screws to the wood flooring under the fiberglass covering with the 12 perimeter screws. On mine "A" is 9", "B" is 11-1/2". There are two 1 by 4 pieces of wood laminated under the angled face of the base running front to back directly under those holes. The holes are about 3/8" in diameter.

Pm's sent....

And a few pics.



Thanks,

John

Is that seat base compatible with the frame on my '82 tique?
The boat came to me with a rotten block of wood as a base!

I want one of the fins, and the gas fill pipe, cap and key.

Is the 4 pieces of interior teak on the side step areas still there and not broken? I saw them in the original pictures of the boat If so I'll take those as well.

Lots of pics of parts!!!
Here we go.....

Donald, I have an 86 sitting in my garage at home. I'll be back there this weekend, so if you need any measurements, I'll be glad to get them for you.

I would like to buy the strut off the boat if you still have it, Had an accident this past weekend bending mine.

He bought the wreck to get the trailer to put under his 87 SN which is presently sitting on another make of trailer. Won't be able to wrench that from his grasp.

also what shape is the trailer in?? i need at the least some fenders off that thing

Up date!!

As of now all the interior seating pieces have been sold!
Thanks guys!

Donald,
This is the rear seat

Which dimensions do you need?

John