Interior teak wood replacement

I just had all of my interior teak re created by a woodworking friend of mine.I have a lot of good pieces left out off of my boat.He did make templates for all of the pieces so more can be made easily.As stated I have some of the pieces left.Feel free to call me @ 608 242 1950 if interested.My boat is a 87 but I think the interiors are the same.

how much for the "L" pieces also and whatever else is suppose to go into boat mine was missing some parts i just took it all out of 89 2001

I had my dash plate made out of aluminum and then placed a carbon fiber decal over it. The switch lettering are also seperate decals from the carbon fiber and each other. I have not had any problems with them coming off.
The side decals I believe are available in differenct colors, black with white shaddow, white with black shaddow, and white with a gray shaddow. I got mine for $185 for a set which did not include the 2001.

This may be a bit late, but any screen printing shop that deals in "overlays" could make a reversed print with whatever graphic you wanted on velvet lexan and 3m performance premask. Then the graphics are forever protected behind the plastic as its affixed ink side down... All Instrument clusters for cars etc are make this way as an "overlay" to the lights and electronics... Basically two screen set ups is all you need... As for the backing plate, there are many guys out there that could duplicate these out of plexi or Polycarb. Why use anything fancier??

You could also just reverse print right on clear plexi, then flood black or whatever color.. Bolt on and go !!

Hell how many are we talking, I'll get ya quote.. Hollywood, tear apart your dash and meet me for lunch tomorrow !!

Moj'

Not that old crap hole on old 83??? man I haven't been there in years, I mean ever ...

Some people have to work.........
Moj'