White Lake 2018

Shirt or sweatshirt? It's going to be 46 Saturday morning.

Don't know. Still have antifreeze in the boat. Cleaned it during Easter break when it was warm two days in a row.

Tim
off topic but was wondering if you’re still doing graphics?

Between 1 and 2

What a great weekend. Weather was right around 70 and the sun was out. Great times were had and WLM put on a nice show for us. Got to meet new people and see old friends. And of course, see some great correct crafts.

And what would a trip to white lake be without some problems. Thanks to John, Neil and Doug for helping us out with a bad ammeter and to Patrick and Marty for diving in and getting us through our first bearing change. We got very lucky and had a bearing go bad on the way from the motel to WLM. Perfect place to have that happen. Both sides are brand new now and my knowledge of trailer wheel assemblies is greater. Thanks again.

Hate to say, I didn't take many pics. Hope others took more.   

Another great weekend at White Lake with some great old and some great new friends. I would like to give a special thanks for White Lake Marine for providing lunch and the boat show with Ramp Passes. The Silent Auction for charity was a great idea and thanks for PCM for the great raffle prizes. Mark, Patrick and Sherwood, from PCM, not only sponsored the event with Tee Shirts and Raffle items but they also participated each night and was involved in every aspect of the event.

Like David Stated, the weather was possibly the best in the last three or more years at the mini. The water temps were still a little cold for most with temps in the low 60's. We broke the Friday Pizza tradition and went out to an Italian Restaurant in Elizabeth Town on Friday night and Saturday night we had over 25 people for the cook out back at the White Lake Motel.

Thanks again to White Lake Marine, and PCM Engines / Correct Craft Boats.

Donald

Special thanks to David and Jesse for making this an educational event.
On Saturday they showed everyone how to rebuild a right side trailer hub. On Sunday, they had a class at the Motel on an alternative method, where they showed how to swap out a left side hub for a complete assembly. Also, thanks for showing that a Budweiser container can be used as a make shift tool box.

Pete, NO Chinese bearings were used and we are sticking to our story.

Hanging out Saturday on White Lake.

This was my first Correctcraft fan reunion I went to and it was a great experience. I’m already looking forward to the next one. It was a pleasure meeting everyone.

Bigbirdmk wrote: I have photos but can’t figure out how to upload them.

Sherwood, if you click on the arrow, it is not a straight arrow titled editor, and new dashboard will appear at the top of your thread. Then you will see two photo's of green trees. The one on the right has an arrow in it. Click on that one and then your CPU will ask you to check your files for pictures. You have to click OK and the photo's will post.

I enjoyed meeting and hanging out with you too.

Donald

Is the blue 60's Ski Nautique closed loop cooled?

That San Juan is so cool I can't stand it.

Thanks for posting the pictures, looks like a great time and calm water!

That San Juan is so cool I can't stand it. ![/QUOTE wrote: + 1

+ 1