Foam removal |
Post Reply | Page <1 4567> |
Author | |
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
I did some work on Lee Braytons (indy car engine builder) small yacht that broke down here in Cleveland and we docked it down in the Flats about 300 feet down from Shooters. I needed the boat roughly for 2 weeks and he told me if i would like i could stay on the boat during the repairs. off to home i went to get some clothes. well on one friday night i counted 20 give or take people on the boat.
when the boat was finally complete he asked me if i had anyone on the boat and you know the answer, apparently he found 2 wine glasses and an empty bottle of wine on the back deck. moral of the story.. dont lend me your boat |
|
"the things you own will start to own you"
|
|
reidp
Platinum Member Joined: December-06-2003 Location: Mooresville, NC Status: Offline Points: 1804 |
Post Options
Thanks(0)
|
I just checked the newest FRPP catelog and the 514 is now at 520 CI. But it's got alum heads/intake, so really light, or is the 600ft./lbs. torque the biggest issue? http://www.fordracingparts.com/crateengine/bigblock.asp Maybe you can just scab/sister some extra stringer meat for additional support. The 392 Stroker is also shown in this catelog. Somebody's gonna bite on one of them. |
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
we'll chain it in there, and maybe a couple trucker's binder's
|
|
"the things you own will start to own you"
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
we use to run these big 3 heavy truck engine 3196 cats turned up to 900 horse each, talk about not thinking of coming back or spiltting in half
|
|
"the things you own will start to own you"
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
Eric what's the deal with the manifolds? What made you want to put them in or you just messing with me? I was kinda looking forward to do some work on my own boat. But if you think there will be a problem with them let me know.
I think I will just give you a call on wednesday morning to see what's going on. I don't want to put you any further behind on your tranny work. |
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
fine with me, im ready to swing the engine in and thought it would be easier with the moter out. i will continue to swing her in
|
|
"the things you own will start to own you"
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
|
|
"the things you own will start to own you"
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
|
|
"the things you own will start to own you"
|
|
79nautique
Grand Poobah Joined: January-27-2004 Location: United States Status: Offline Points: 7872 |
Post Options
Thanks(0)
|
looks like your pretty close to laying carpet in the thing.
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
Eric, I think I will call you in the morning. It sounds like I have mis understood you somehow. Will there be a problem with putting the manifolds on once the motor is back in, are you thinking there will be a problem do to the taper on the OEM manifolds. I just hate to keep you tied up working on my boat when I know you said your starting to get busy with trannies.
Talk to you in the morning say about 9-9:30ish. |
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
The trans looks great by the way. The boat is starting to look like the interior is supposed to look. Sorry you missed lunches and dinners.
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
It was good talking to you this morning Eric, cleared some things up. Now I am just waiting for the lake to thaw. probably not happening anytime soon as we are calling for 2-4 inches of snow tonight.
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
prop showed, sent it back
|
|
"the things you own will start to own you"
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
thank Eric sorry about the mix up on Skidims part. I am pretty depressed about the 1260 issue. Now I have to wait until mid april to have a new prop on the boat.
|
|
JMurph
Gold Member Joined: January-06-2006 Location: Maryland/NC Status: Offline Points: 738 |
Post Options
Thanks(0)
|
Doesn't sound like waiting until mid-April should depress you too much. You have got to be stoked about getting her back in the water though. Good Luck. -JMurph |
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
you guy's keep forgetting about the 3 month water test, think Halloween
|
|
"the things you own will start to own you"
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
Eric the water test length gets longer everytime you mention it. I find that funny. Anyway any new pics for us? Did you get the shaft back finally so you can install it and the engine?
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
OH yeah 60 degree Saturday and Sunday, lake is starting to open up. Wife says the weather man is calling for cold temps and snow again this week end. I told her I would be home late from work tonight, as I have to stop and kill him for saying such things.
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
Alignment tommorow!!!
I'll get some pics tommorow |
|
"the things you own will start to own you"
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
sounds like fun, hopefully the alignment doesn't give you much trouble. I am sure your ready to be done with it.
|
|
Guests
Guest |
Post Options
Thanks(0)
|
eric im gonna be sending out my 4 blade acme 422..i know santes decent, any others?..i know you mentioned something but dont remember details.
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
Randy said santee's was cheaper but i didnt know if they have prop scan,
hydromotive in Twinsburg, 3304254747 i think Cleveland prop 216-961-5858 or General prop in Fla 941-748-1528 (i know they use prop scan) |
|
"the things you own will start to own you"
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
Eric I would agree with not firing up the BFN, slep with the windows open last night but calling for snow again this week end. I think cold temps are still in the forecast for a few more weeks for me. The lake is open in spots but still alot of ice.
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
Eric is no news good news or bad news?
|
|
Guests
Guest |
Post Options
Thanks(0)
|
bad news...the shop burned down with your boat in it.....he had no insurance bfn..so yes to answear your question..
|
|
87BFN owner
Grand Poobah Joined: August-25-2006 Location: Saline, MI Status: Offline Points: 2194 |
Post Options
Thanks(0)
|
Ryan very funny, but one shouldn't joke about a man's boat like that. Causes bad carma for the one joking about it.
|
|
Guests
Guest |
Post Options
Thanks(0)
|
lol...cant wait to see pics when its done!
|
|
scott8370
Gold Member Joined: November-30-2005 Location: United States Status: Offline Points: 872 |
Post Options
Thanks(0)
|
Yea...Let us see some pictures before the engine and carpet are in.
|
|
Scott
|
|
eric lavine
Grand Poobah Joined: August-13-2006 Location: United States Status: Offline Points: 13413 |
Post Options
Thanks(0)
|
|
|
"the things you own will start to own you"
|
|
scott8370
Gold Member Joined: November-30-2005 Location: United States Status: Offline Points: 872 |
Post Options
Thanks(0)
|
Eric, Looking good
|
|
Scott
|
|
Post Reply | Page <1 4567> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |