rudder slop |
Post Reply |
Author | |
AAM196
Gold Member Joined: October-23-2012 Location: Pittsburgh, PA Status: Offline Points: 846 |
Post Options
Thanks(0)
Posted: August-14-2020 at 2:05pm |
So I had a little rudder slop that resulted in the steering feeling a little tight when turning at slower speeds (15-20 mph)... it was only felt after a right hand turn coming back to center... I thought maybe it was the knuckle in tilt helm... but turned out to be rudder play (just a little)... I was surprised when I removed the packing to find 4 wraps! I expected to find 3... eitherway... I added 4 new wraps and hand tightened best I could and still had a little play; I could see the gap between my tiller arm and the top of rudder port had play even with the washer... so I added a 5th wrap but had to use channel locks to tighten it a little more than hand tight but the results are amazing! no drip... supper easy to turn and no slop.
My first thought is maybe there should be a 2nd washer/bushing or thicker one in there... anyone else need 5 wraps of packing in their rudder port?
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |