Boats For Sale:
Engine wanted |
Post Reply 
|
Page 12> |
| Author | |
stepper459 
Senior Member 
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Engine wantedPosted: April-01-2021 at 10:15pm |
|
My father-in-law is looking for an engine for his '56 Shepard. I will not go into the history of the current engine, but he wants to put in a "standard" ski boat engine like a 351 from an old Correct Craft or similar. I'm currently scouring the local listings for a boat that "just has one soft spot in the floor but runs great" but I haven't found one yet. I feel bad taking a solid boat and yanking its engine, but I'd be willing to just about give away the hull once we have the engine and transmission. So maybe someone's got a rotten floor and would rather swap their engine into a solid hull I find? Or maybe we can make an arrangement...
Anyway, we don't want a built-up hot rod engine, we don't want something original to the boat or even to the era, we'd love a 70's or 80's era 302 or 351 that's been properly cared for and ready for an easy retirement of shuttling around a guy in his 70's at medium cruising speed in his Shepard. I have been kind of authorized to spend around $7k initially, which should get me something decent and maybe a little return on selling the complete boat minus drivetrain. I should add that of course I'd take an engine on its own, but would be willing to take a whole boat and/or trailer, whatever. I can work with anything, but we just want a good running engine that doesn't need major work itself. Thanks in advance for any leads. I'm only able to drive within a couple hours of central NH. Here's the boat:  \  |
|
 |
|
|
67 ski nat
Platinum Member 
Joined: July-19-2018 Location: Santa rosa Status: Offline Points: 1194 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 6:41am |
|
Thanks for pics. Beautiful boat.
Is it same manufacturer as ‘Shepherd’ boats, still making classic wood Let’s do a 454 or Chrysler 440, |
|
|
|
|
8122pbrainard
Grand Poobah 
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 7:36am |
331? Crown 135?
|
|
|
|
|
James T Brockma
Senior Member
Joined: November-02-2007 Location: Indian Wells CA Status: Offline Points: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 8:53am |
|
Stepper459 go on PlanetNautique.com. There is a post by KevinMcElroy listed under “Boats for Sale”. He is parting out/selling a 2001 SAN with a GT40. Granted, the boat is a Vdrive and not the transmission you need but you might be interested in the motor.
|
|
|
Jim '06 216
'98 SN 176 |
|
|
|
|
SNobsessed
Grand Poobah
Joined: October-21-2007 Location: IA Status: Offline Points: 7102 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 8:55am |
|
A boat without engine will have little value. If it has rotted stringers, you will likely have to pay to dispose of the hull. Of course you can part out rudder, strut, etc to recoup some money.
Putting a period correct engine into that beautiful boat will be the best investment.
|
|
|
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin |
|
|
|
|
8122pbrainard
Grand Poobah
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 9:18am |
Yes, a period correct is best. The original is even better. The value of a classic or antique plummets without ether.
|
|
|
|
|
67 ski nat
Platinum Member
Joined: July-19-2018 Location: Santa rosa Status: Offline Points: 1194 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 10:23am |
|
If your Shepard is the same as the shepherd classic wood boats
You could talk with them about a proper repower and price. That combo might add value Shepherdboatco.com |
|
|
|
|
Hollywood
Moderator Group
Joined: February-04-2004 Location: Twin Lakes, WI Status: Offline Points: 13515 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 10:30am |
|
Classic CCF. A whole bunch of suggestions he didn’t ask for.
Do you have an engine or not? Lol |
|
|
|
|
Riley
Grand Poobah
Joined: January-19-2004 Location: Portland, ME Status: Online Points: 7954 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 5:56pm |
|
Best/least expensive way to find a decent engine is to pick up a junk boat that needs stringers, but has a good engine. Otherwise watch craigslist, facebook, or CCF. Jody at FLA Inboards had an engine posted for sale not too long ago.
Nice boat. Is that NH?
|
|
|
|
|
KENO
Grand Poobah
Joined: June-06-2004 Location: United States Status: Offline Points: 11112 |
Post Options
Thanks(0)
Quote Reply
Posted: April-02-2021 at 6:36pm |
|
Stepper In a somewhat meager attempt to keep your thread on track without all the "advice" about what to do to the boat, I thought I'd post the craigslist ad that's in the link below. Not much info in the ad. It could be just what Riley mentions in his post............maybe Maybe you've already seen it and figure it's too cheap to have a good engine and transmission in the boat. Maybe you don't want a normal rotation engine Maybe you haven't seen it Figuring that you're somewhere around Squam Lake, Google tells me that it's not far out of your 2 hour driving range. I "gotta" think that there's somebody on this forum that's really pretty close who might volunteer to take a look at it for you. I "gotta" think that he owns a Ski Supreme too I wouldn't want to volunteer him, but you could send a PM to GottaSki and see if he could take a look at it for you. PS Don't tell him how you got his name
 |
|
|
|
|
CCFAN
Newbie 
Joined: October-15-2019 Location: Norwalk, Ohio Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: April-03-2021 at 9:44am |
|
Goodmorning, I have a1974 OMC 307 225 hp engine that had a total rebuild last summer. It might have 3 hrs on it. It is in a 1975 correct craft southwind. If you have any interest or are curious please feel free to call me 419-541-1217 . I am putting the boat up for sale in the near future. I am located on Sandusky Bay right next to Cedar Point Amusement Park in Ohio on Lake Erie. Scott
|
|
|
Scott
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-04-2021 at 10:34pm |
|
Thanks for all the replies so far, sorry I was offline for a few days there
First, I spelled the name of the boat wrong, it's a Shepherd. Nothing weird there, just a misspelling on my part. Second, Pete, sorry, I'm not sure the model of the engine it has. It's an old (original to the boat, probably) inline six. It's similar to the old inline six in the Hyster forklift we had at the marina where I worked a while back. Third, there is no intention of selling this boat now or ever, nor do we care what its value is. For a few years now its value has been zero, because we haven't used it. My kids have never been out in it, and that's a shame. My father-in-law wants something reliable. He was tempted by a crate engine MerCruiser 4.3 but I guess that's not done so easily these days either. So here we are, looking for a nice older V8 not because they're correct but because they can be extremely reliable and they're in every ski boat and therefore "easy" to find. In theory. Thanks for the leads, I'll chase down those that I can, regionally, and we'll find one. Yes, we're on Squam Lake in NH. About 2 hours north of Boston. Oh and thanks for the comments on the boat, yeah I love it and we just want to see it back in the water under its own power again. |
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-04-2021 at 10:37pm |
This is interesting, I'll at least follow up to see if I can learn a little more, before I enlist others, thanks for the tip though you never know. There's an 88 I was looking at and the price came down already on the Craigslist ad. Could be a good engine but the boat is maybe too nice? I haven't had time to go look at it.
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-04-2021 at 10:37pm |
Thank you for the idea, it's a bit far for me right now, but you never know. I'll have a lot of free time in June, if we are still looking...
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-04-2021 at 10:39pm |
This is exactly what I'm hoping to find, but haven't yet. I figured there are a lot of eyes and ears here on this stuff. I can't really travel too far right now but shipping is maybe an option if the engine was known to be good. And yeah, thanks. It's in NH on Squam Lake. This boat isn't going out of the family any time soon, in fact it'll be mine next I suppose.
|
|
|
|
|
MrMcD
Grand Poobah
Joined: January-28-2014 Location: Folsom, CA Status: Offline Points: 3749 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 1:27am |
|
As you search keep in mind the Supra, Malibu, Centurian, Ski Supreme, Mastercraft and Correct Craft all use power plants that could be put in your boat. The wood boats are heavy, if a big block came along I would consider it for your boat. Otherwise price wise the best, low hour example you can find that is complete and already has the Exhaust, Transmission, Water Pumps and mounts included would be your best bet. If your new combo is missing any parts the missing parts might cost you as much as the new engine costs.
That boat is beautiful, you have to get it back out on the water. Years ago we used to ski behind a friends old wood boat, I think it was a 23' Century, looked similar to your boat but they had re powered it with a 390 Ford and that boat would get up and go when asked. The wake was a little tall for skiing but we were young and it was available so we skied a lot behind it. I think that wake was close to 3 foot tall on a 75' rope. Great looking boat and fun on long boat rides. Get yours back on the water. The Chevy 307 mentioned was not around for long but they are great little engines. It is a 283 Chevy Block but uses the 327 Crankshaft and strokes the 283 out to 307. GM only used them for a couple years (1970-1972 maybe) but it had much better torque than a 283 due to that long stroke, similar to taking the GM 350 and installing the 400 crank to get a 383, the long stroke gives them a lot more torque. I had one in a 1971 GM Blazer, great engine, good MPG but short on power compared to the 350. If you are OK with 225 HP they are good engines. Mark
|
|
|
|
|
GottaSki
Grand Poobah
Joined: April-21-2005 Location: NE CT Status: Offline Points: 3363 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 8:34am |
|
Indeed Ken, that would be an easy one to put eyes on, as its only an adjacent town away.
|
|
|
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole |
|
|
|
|
CCFAN
Newbie
Joined: October-15-2019 Location: Norwalk, Ohio Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 9:26am |
|
If somehow this engine would work for you I could deliver it to you. If you look in the for sale section, I listed the boat yesterday. If not good luck in your search and have a great summer.
|
|
|
Scott
|
|
|
|
|
GottaSki
Grand Poobah
Joined: April-21-2005 Location: NE CT Status: Offline Points: 3363 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 9:52am |
|
Not as simple but there are engines out there..
Thinking outside the box, TWO good looking 460's at your budget, could sell trailer and outdrives and everything, get tranny and bellhousing and have money left over sell engine or keep as spare |
|
|
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole |
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 9:58am |
I emailed the guy but haven't heard back. If he responds in a way that would make me want to check it out, I'll reach out to you if you don't mind. But let's make sure we aren't wasting time first. Thank you! |
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 10:00am |
Thank you, that's a very generous offer. Let me see what comes up locally and we'll go from there.
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-05-2021 at 10:08am |
|
Here's a lead, posted 24 hours ago - this kind of stuff won't last when the weather gets nice. The ice just went out on Squam probably last night, and it'll be mid-60's later this week.
https://vermont.craigslist.org/boa/d/saint-johnsbury-1998-malibu-sportster/7301662093.html edited to add: On second thought, that might be too cheap, and could just be a scam. Oh well I won't let that go too far.
|
|
|
|
|
ArtCozier
Platinum Member
Joined: April-25-2012 Location: Orlando FL Status: Offline Points: 1023 |
Post Options
Thanks(0)
Quote Reply
Posted: April-21-2021 at 11:19pm |
|
I have not gone back and read all the above posts, but I do have a low-hour PCM 302 that I would sell. Complete engine, and I have a choice of two transmissions, both in-line Warner or Velvet Drive, whichever you might prefer. One is a 1017 and the other a 1018, which is the heavier duty one. Here's an important question: The 302 that I have is a reverse rotation engine, which is to say that the flywheel turns CLOCKWISE when viewed from the flywheel end of the engine. I am in Florida, retired after working for Correct Craft for almost 50 years.
|
|
|
"Art"
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: April-22-2021 at 11:57am |
Art, thanks for the reply. I am still looking for an engine, maybe we should talk on the phone. I will send you a private message with my number, give me a call when it's convenient for you - if I don't answer I'll call you back. I'm a teacher so I'm in class a lot during the day, but then have lots of random hours of free periods too. Thanks, I look forward to talking with you.
|
|
|
|
|
Jakebean2015
Newbie
Joined: March-10-2021 Location: Georgia Status: Offline Points: 14 |
Post Options
Thanks(0)
Quote Reply
Posted: May-02-2021 at 1:28pm |
|
I got a 86 351 if u still looking for one
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: May-03-2021 at 2:28pm |
Thanks, but I think I've got an engine from Art Cozier here, we're still working on some details but it seems likely to work out. |
|
|
|
|
ScottZ
Platinum Member
Joined: January-20-2004 Location: Clanton, AL Status: Offline Points: 1154 |
Post Options
Thanks(0)
Quote Reply
Posted: May-04-2021 at 4:32pm |
|
Wonderful boat. My dad had an 18 foot utility direct drive powered by a 350 Chev. that was originally powered by an inline 6 cylinder. Art, I wonder if any of the Tim or Todd Benjamin may have an engine sitting around. They are up his way.
|
|
|
Scott Zuelzke
Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
|
|
|
|
8122pbrainard
Grand Poobah
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
Quote Reply
Posted: May-04-2021 at 5:28pm |
A DD Shepard? What happened to it? Yes, they loved to build V drives.
|
|
|
|
|
stepper459
Senior Member
Joined: June-17-2007 Location: United States Status: Offline Points: 349 |
Post Options
Thanks(0)
Quote Reply
Posted: May-04-2021 at 9:54pm |
Thanks, it is a nice boat. I looked in the brochures from http://www.shepherdboats.com/brochures.asp and the boat we have sure looks like a '53-'54 but I guess that's somewhat irrelevant at this point. Good to hear you had a 350 in one that used to have an inline 6, so it worked haha. We might end up with a Ford 302 in there, if all goes well. One of the challenges will be making the exhaust work, where the old 6 has a single, small straight copper pipe. Aside from joining the two sides of a 302 exhaust, I'd imagine it should be larger all the way out through the transom. I'm likely to be directly involved in the fitting of this engine. I'm lucky to already be talking with someone like Art, he's been great to talk to already. |
|
|
|
|
Gary S
Grand Poobah
Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
Post Options
Thanks(0)
Quote Reply
Posted: May-04-2021 at 11:08pm |
Like getting matter out of a black hole
 |
|
|
|
|
Post Reply
|
Page 12> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
stepper459 wrote: