SOLD--1976 Ski Nautique misc parts--ALL SOLD

My 1976 Ski Nautique was parked near a storage shed that caught fire. It is no longer seaworthy so I have stripped most everything off the hull. Many good parts. I do not need these parts..........NO REASONABLE OFFER REFUSED.........!!!

Trailer...$350
Velvet Drive transmission...$400
Lake water inlet with screen and elbow...$5
Lifting eyes...$20 pr
Hatch cover...$5
Fin...$50
Strut...$50
Prop shaft, stuffing box and coupler...$50
Steering assembly with cable (17') and wheel...$50
Control assembly w/cables 17'...$50
Bow light...$10
Engine cover w/hinges
Flywheel, damper plate, dust cover for 351W
Bellhousing 351W
Crank shaft 351W

Yes, good condition. Yes, they fit 351W. I do not know about clearance issues between engine and engine cover on your boat.

I tested them on the engine before I removed them. No leaks, no overheat, no water in oil.
I can get them tested locally if you want to pay for the testing.

iamabuyer wrote: I tested them on the engine before I removed them. No leaks, no overheat, no water in oil. I can get them tested locally if you want to pay for the testing.

I question a "test" while on the engine. On the engine you can't see inside the exhaust cavity!!

How much for the T-handle drain plug?

I'll order some off of ski dim then. Thanks for your time though!

iamabuyer wrote: They are worth $100 each just to have as spares. The shipping will kill ya. Maybe you should buy new locally?

Neil,
I highly recommend pressure testing the manifolds if you want to sell them. Ones with leaks really aren't even good are spares. Do it yourself. Make a block off plate for the top where the riser is bolted on, fill them with water and add compressed air.

Would like to buy the ski pylon (tower) if available, and the back lift ring set if its complete. Thanks, Cliff

I'm interested in the 5-gauges, 1-tach, and trans. cooler. Are they still available?
Thanks

I will take the control assembly with cable if you still have it?

fedexrc wrote: hi, i need the windshield frame, without glass, can you take out the windshield glass? i will pay $200 and ship to argentina

I don't have any idea how to ship to Argentina. Sorry.

Got everything that I had Purchased from you in great condition and in a timely manner!
Really enjoyed dealing with you and I might be interested in your exhaust manifolds once
I"ve done a little more research.

I want the rudder assembly ..do you still have it ..

I realize it has been awhile from your original post, Do you happen to have at least one of the spedo gauges? How about the Prop?

Trailer still available?