98 GT40 sensors and swithces

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

I started this new tread so as not to hijack Michaels thread that is NOT talking about a GT40 :)   LinkThe following pictures are of my sensors and switches I took last year while under the dog house. Mainly was working on a temp gauge issue not reading what my infra red gun was. 10 deg difference. 
My labels on threee of the items are based on the diagram in the GT40 service manual page 2A-2. Engine coolant temp sensor (ECT), Air Charge Tenmpertature sensor (ACT),  Oil pressure switch for (SLOW) and Water Temp switch for (SLOW). 
The engine temp sensor on the water pump I labeled as such because it has a tan wire as shown in several wiring diagrams for engine temp, and in my troubleshooting the temp gauge, this wire when grounded and open caused the temp gauge needle to move. 
Hopefully this will help with wire colors and locations. If PCM decided to change wire colors and locations in other years, then this is at least good for the 1998 years 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Mpost Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: July-05-2018 Location: Monticello, MN Status: Offline Points: 329	Post Options Post Reply Quote Mpost Report Post Thanks(0) Quote Reply Topic: 98 GT40 sensors and swithces Posted: April-12-2021 at 1:25pm
	I started this new tread so as not to hijack Michaels thread that is NOT talking about a GT40 :) Link The following pictures are of my sensors and switches I took last year while under the dog house. Mainly was working on a temp gauge issue not reading what my infra red gun was. 10 deg difference. My labels on threee of the items are based on the diagram in the GT40 service manual page 2A-2. Engine coolant temp sensor (ECT), Air Charge Tenmpertature sensor (ACT), Oil pressure switch for (SLOW) and Water Temp switch for (SLOW). The engine temp sensor on the water pump I labeled as such because it has a tan wire as shown in several wiring diagrams for engine temp, and in my troubleshooting the temp gauge, this wire when grounded and open caused the temp gauge needle to move. Hopefully this will help with wire colors and locations. If PCM decided to change wire colors and locations in other years, then this is at least good for the 1998 years
	84 SN Sold 98 SN Lund Pro V 1975 Alumacraft

KENO Members Profile Send Private Message Find Members Posts Add to Buddy List Grand Poobah Joined: June-06-2004 Location: United States Status: Offline Points: 11112	Post Options Post Reply Quote KENO Report Post Thanks(0) Quote Reply Posted: April-12-2021 at 6:13pm
	Now that deserves one of these Marty

98 GT40 sensors and swithces

About CCF

Donate

Partners

Contact