change keyless code

I'm still looking for the key pad on my 85BFN
Lefty

I've never changed my codes, but I just reread section 1 of my owners manual which describes the procedure.

System allows for three sets of codes
1) Master code from the factory, cannot be changed.
2) Primary code, usually programmed in by you and dealer when you buy the boat. Will run everything on the boat
3) Secondary code, can be entered by you and provides only limited access to boat functions.

To set the the primary code, you enter the factory code to unlock the system. Depress the 1 and 4 keys at the same time until the system indicator light flashes. Enter a code from two to eight characters and press start. Re-enter the code and press start again. The system indicator light should stop flashing and stay on. If it does not stop flashing press stop and begin again. To relock, you can now use the primary or master code.

To change an existing primary code.
Make sure system indicator light is off. Enter the existing primary user code then
push 1 and 4 at same time. Light should now flash. Enter new code and press start. Enter again, and press start again. Light should stop flashing and stay on.

BKH