still trying not to send parts to reycle

Stephen and I just went thru our inventory of 351W used engines. we have 10 core blocks with cranks. we have 6 nice cast iron timing chain covers,6 bell housings,5 oil pans. we will be sending off 10 sets of connecting rods to the machine shop for resizing.we will be salvaging a number of pistons. Out of all this I will be building three motors. Sooo the rest of the stuff needs to go.Also a lot of this stuff is Right rotation and I will only be building lefthand motors. In this mix of parts their is a right hand cam shaft with only about 15 hours on it. Many Many other parts including 3 nice intake manifolds.Also one of these core motors is an old Mercruiser 302.
Any intersted let us know as we dont want a lot for it just need to get it out of the shop.

Thanks.
Jody

Let me know how much you want for a timing cover, assuming they are the type that accepts the bracket for a RWP.

thanks
Joe.
jhf6659@yahoo.com

Jody, I need an oil pan.
Email me with info.
rreavis@cisco.com

Thanks

Hi Joe

Email me thru floridainboards@msn.com. give me your shipping address, I will give you a total and I will get them out ASAP.

Thanks again Correct Craft Fan, A donation will be made to the web site.

Thanks

Jody

I'm looking for a set of PCM valve covers, a stock 351 intake, a wedge carb spacer and a RH starter. Let me know

Hi,
yes I have a very nice stock intake.
as far as Valve covers I have three pairs of the non descript / stock automotive style stamped that came on later PCM Motors, and one set of the finned red PCM, but those are made of GOLD!!. I keep a rebuilt right hand starter in the shop but I get a premium for those. You might send your old one to a rebuilder as they usally can rebuild them for $50-$75 dollors. As most of the stuff I rebuild are powerplus packages I do not have a wedge type spacer. You might try GlenWood for one of those.

you can e-mail for prices on the intakes or pick up the phone and call.

thanks again Correct Craft Fan.

Jody