Parts for a 69 Mustang

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I�m looking for anyone with a used/cheap ski platform fitting a 16" CC Mustang from 1969. I'd also be interested in the original Speedo rigging from the back of the boat. My boat has a small downward facing chrome guide right at the hole the airline comes through. The airline then travels 6-8" and terminates to a metal cylinder chamber, approximately 1" in diameter and approximately 14" in length. The airline is also terminated to the bottom of this cylinder and travels an additional 2-3", connecting to the Speedo sensor below the water line. This overly complex system is something I�ve been unable to find new. I�m now looking for anyone parting out an old boat or looking to sell these parts. My plan is to add a second Airguide speedo and have the back of the boat look symmetrical. Thanks, Big Jim

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Big Jim Slade Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: July-12-2004 Location: United States Status: Offline Points: 67	Post Options Post Reply Quote Big Jim Slade Report Post Thanks(0) Quote Reply Topic: Parts for a 69 Mustang Posted: July-27-2004 at 7:33pm
	I�m looking for anyone with a used/cheap ski platform fitting a 16" CC Mustang from 1969. I'd also be interested in the original Speedo rigging from the back of the boat. My boat has a small downward facing chrome guide right at the hole the airline comes through. The airline then travels 6-8" and terminates to a metal cylinder chamber, approximately 1" in diameter and approximately 14" in length. The airline is also terminated to the bottom of this cylinder and travels an additional 2-3", connecting to the Speedo sensor below the water line. This overly complex system is something I�ve been unable to find new. I�m now looking for anyone parting out an old boat or looking to sell these parts. My plan is to add a second Airguide speedo and have the back of the boat look symmetrical. Thanks, Big Jim

kenny g Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Senior Member Joined: December-13-2003 Location: United States Status: Offline Points: 318	Post Options Post Reply Quote kenny g Report Post Thanks(0) Quote Reply Posted: July-27-2004 at 10:35pm
	jim - [ original ? ]speedo rigging on the transsom .? in 69 ? i think the pitot pickup was located on the keel.forward of the shaft inlet in the hull. looks like a little trim fin,with a hole [pitot ]pickup in the center.maybe your 69 came with an additional speedo that was added later ?. that just don't sound right to me,not in 69.no tubes mounted on the transom that i've ever seen in 69. but things do change.what you describe is exactly whats under the deck of the 68.but only a copper tube mounted to the side of the starboard stringer under the dash.
	kenny g

Parts for a 69 Mustang

About CCF

Donate

Partners

Contact