1994 Ford PCM 351HO ENGINE
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1022
Printed Date: November-21-2024 at 6:49pm
Topic: 1994 Ford PCM 351HO ENGINE
Posted By: righterjc
Subject: 1994 Ford PCM 351HO ENGINE
Date Posted: November-29-2004 at 2:21pm
complete 1994 351HO engine from top to bottom & front to back. needs #2 valve replaced and has a very very very small chip on #2 piston,ProTec management system, manifolds, holly carb, was running great but needs new valve, gt40 heads,800 hrs, $1000 or obo
CALL 714 745-3267 or e mail me at righterjc@sbcglobal.net, Pics now available.
|
Replies:
Posted By: Guests
Date Posted: November-29-2004 at 11:20pm
|
was this engine used in salt water?Do you have a picture?
|
Posted By: Guests
Date Posted: November-30-2004 at 1:23pm
|
Fresh and salt, my mechyanic said it was in good shape. I will have pic's tommorrow.
|
Posted By: Guests
Date Posted: December-01-2004 at 2:54pm
|
I have pictures available. E-mail me at righterjc@sbcglobal.net for pics
|
Posted By: 79nautique
Date Posted: December-01-2004 at 4:27pm
is this the engine that hydrolocked in the #2 cyl? that was posted before?
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique
|
Posted By: righterjc
Date Posted: December-01-2004 at 6:15pm
Im not sure what hydrolock is ,I have two fuel tanks on my correct
craft and I usually run from my rear tank, I switched to my front tank and
my mechanic said my front tank had bad gas in it which tuliped the #2
valve . I Switched back to my rear tank and with the newer fuel and and
changed the spark plug and it seemed to run fine except there was no
compression on the #2 plug per my mechanic, He said there was a very very
small small chip about 1/2 the size of a sunflower seed on the #2
piston. He said I could still run engine with just a valve job and it could
run for a long time or I couild do a rebuild. But I had a chance to put
in a 1999 PCM so I went for it.
|
|