rudder...
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=10493
Printed Date: September-29-2024 at 3:35am
Topic: rudder...
Posted By: 82wake2001
Subject: rudder...
Date Posted: May-14-2008 at 4:56pm
Ok i have the steering cable replaced and its like butter. Now i have water coming in from the top of the huge nuts that attached the rudder to the steering cable. I have also noticed the rudder moves up and down about 2 inches if I move it by hand. i have tried to adjust the collar and the locking nut with no luck does anyone have any material showing hoe the housing is assembled?
------------- Joe
1982 ski nautique 2001
"Lady of the Wake"
|
Replies:
Posted By: 8122pbrainard
Date Posted: May-14-2008 at 7:20pm
Joe, You need to repack it just like you would the stuffing box on the prop shaft. It should take the 1/4" packing that Skidim sells or any marina. There are several good threads on the procedure. I'll see if I can find one and get back.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: TRBenj
Date Posted: May-14-2008 at 7:30pm
8122pbrainard wrote:
It should take the 1/4" packing that Skidim sells or any marina. |
I wouldnt make that assumption. My '90 took 3/16". Id pull the old stuff out or measure the packing gland first to be sure.
-------------
|
Posted By: 8122pbrainard
Date Posted: May-14-2008 at 7:34pm
TRBenj wrote:
8122pbrainard wrote:
It should take the 1/4" packing that Skidim sells or any marina. |
I wouldnt make that assumption. My '90 took 3/16". Id pull the old stuff out or measure the packing gland first to be sure. |
Tim, On the rudder too?
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: Quigs85SN2001
Date Posted: May-14-2008 at 9:10pm
My '85 takes 3/16" on both the rudder and prop shaft.
------------- Brian
|
Posted By: TRBenj
Date Posted: May-14-2008 at 9:37pm
8122pbrainard wrote:
TRBenj wrote:
8122pbrainard wrote:
It should take the 1/4" packing that Skidim sells or any marina. |
I wouldnt make that assumption. My '90 took 3/16". Id pull the old stuff out or measure the packing gland first to be sure. |
Tim, On the rudder too? |
Yup.
-------------
|
Posted By: David F
Date Posted: May-15-2008 at 3:04pm
The up and down movement is normal and acceptable. You could try tightening the packing nut.
-------------
|
Posted By: 88 Nautique
Date Posted: May-15-2008 at 7:28pm
Quigs85SN2001 wrote:
My '85 takes 3/16" on both the rudder and prop shaft. |
Same with my 88. Just ask them at Skidim. They'll know.
------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1657" rel="nofollow - My 88 Nautique
|
Posted By: anthonylizardi
Date Posted: May-16-2008 at 8:10pm
Just called and Skidim told me is 3/16 on both. Well, at least on a 87 SN.
|
|