Gutting Jet Boat 20 Flooring!
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1061
Printed Date: October-05-2024 at 11:16pm
Topic: Gutting Jet Boat 20 Flooring!
Posted By: scout
Subject: Gutting Jet Boat 20 Flooring!
Date Posted: December-13-2004 at 9:14pm
|
I stripped out carpet and foor is shot. Under floor is a thin GLASS layer covering what looks like hard foam, from hull to engine hole--the foam is1973vintage.
Should i take out or leave alone-if out, i would have to slice thin layer if fiberglas from hull--boat hole sides are 3/4 plywood--also foam is on both sides 16" by 6 feet+- Thanks in Advance--  ------------- mark |