97 Super Sport access to Packing
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=11098
Printed Date: September-29-2024 at 7:14am
Topic: 97 Super Sport access to Packing
Posted By: dcoll
Subject: 97 Super Sport access to Packing
Date Posted: July-04-2008 at 10:46am
I have a 97 Super Sport and I am having a hard time gaining access to tighten the prop shaft packing. I have saddle ballast tanks. The manual says to remove the floorboard. I did & that does not get me there. It seems like I have to remove the rear seat back rest. Does anyone know the easiest way to gain access to tighten the prop shaft packing? Thank you
-------------
1997 Super Sport Nautique
|
Replies:
Posted By: eric lavine
Date Posted: July-04-2008 at 12:40pm
|
its a tough one, you may have to remove the seat, good time to check the alignment too..
|
Posted By: dcoll
Date Posted: July-04-2008 at 1:13pm
Thank you for your quick response. That is not what I wanted to do but at least when I do remove the seat, I won't feel like a cheesedoodle if there was a better way.
-------------
1997 Super Sport Nautique
|
|