Print Page | Close Window

Engine Flusher Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1162 Printed Date: December-04-2024 at 5:00am Topic: Engine Flusher Posted By: DKSty Subject: Engine Flusher Date Posted: January-29-2005 at 12:49pm I am installing a Perko engine flusher on a 351 in a 80 Nautique. There is a coupling with two hoses leading to the tranny. Should I install the flusher on the hose from the inlet to the coupling or on the hose from the coupling to the impeller. Thanks in advance for everyone's help. Replies: Posted By: jameski Date Posted: January-31-2005 at 11:02am That "coupling" is your transmission cooler. Install the flusher in-line on the hose from the inlet to the cooler - so your transmission fluid (as well as your engine) will be cooled by the water hose. ------------- current boat http://www.correctcraftfan.com/diaries/details.asp?ID=1977 - 94 Sport Nautique previous boat http://www.correctcraftfan.com/diaries/details.asp?ID=601 - 78 Martinique Posted By: DKSty Date Posted: January-31-2005 at 9:26pm Thanks jameski. I thought that made sense but I wanted an expert opinion.

Print Page | Close Window