Nicson/aluminum exhaust manifolds
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1167
Printed Date: December-04-2024 at 2:42pm
Topic: Nicson/aluminum exhaust manifolds
Posted By: barr 68
Subject: Nicson/aluminum exhaust manifolds
Date Posted: February-01-2005 at 8:57am
Are there ,or, have there ever been manufactured , aluminum exhaust manifolds for the Chrysler marine LM318 series of engines? If so ,does anyone have a useable set they will sell? Thanks, Jim
-------------
barr68
|
Replies:
Posted By: nautique frk
Date Posted: February-01-2005 at 2:50pm
Glenwood marine sells the aluminum exhaust manifolds for Chrysler ,
get a catalog at www.glenwood.com
Mike
|
Posted By: barr 68
Date Posted: February-02-2005 at 4:27pm
Thanks for the response. Checked the Glenwood web site,they have manifolds for big block chrysler only. Apparently the small block aluminum chrysler small block manifolds are rare or non existant.Jim
-------------
barr68
|
Posted By: nautique frk
Date Posted: February-02-2005 at 9:07pm
Jim ,
sorry glenwood did not have the ones you need
try this one www.hurrikain.com They specialize in Chrysler inboard parts .
Good luck , Mike
|
Posted By: barr 68
Date Posted: February-07-2005 at 11:45am
Thanks again for the lead,unfortunatly no luck,Jim
-------------
barr68
|
Posted By: reidp
Date Posted: February-07-2005 at 1:21pm
Jim,
I've searched as well, and I've yet to see a pair for sell. That's not to say that Nicson or Harmon or someone else didn't cast some back when. I'd like a pair myself. I guess you know that Osco has cast iron ones that have been a popular substitute for years. We'll just have to keep looking for the lightweight ones.
-------------
ReidP
/diaries/details.asp?ID=231&yrstart=1971&yrend=1975 - 1973 Mustang
|
Posted By: barr 68
Date Posted: February-07-2005 at 10:45pm
Thanks Reid, I agree ,someone must have made them at one time or another.On another subject do you or anyone you know have a correct craft trailer that will fit my Barracuda (and that they are willing to part with)?The one I have is'nt original or worth fixing.Thanks for your help as always,Jim
-------------
barr68
|
Posted By: Rick
Date Posted: February-08-2005 at 3:21am
Try Paul at Blue Ridge Marine in Lynwood Wa I got a pair of used manifolds for my 66 318M. They were expensive but work like a charm.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=250&yrstart=1996&yrend=2000%20" rel="nofollow - 2000 Ski
|
|