Filler neck gorunded?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=11682
Printed Date: September-29-2024 at 11:35am
Topic: Filler neck gorunded?
Posted By: 74SkiNautique
Subject: Filler neck gorunded?
Date Posted: August-23-2008 at 11:54pm
I took my tank out to replace all of my exhaust hoses. I found a small yellow wire stuck in the filler neck hose. Does my filler neck need to be grounded to the tank?
------------- 74SkiNautique
|
Replies:
Posted By: DrCC
Date Posted: August-24-2008 at 3:28am
Posted By: eric lavine
Date Posted: August-24-2008 at 11:23am
its there for a reason, i would probably say for static spark when filling the boat
------------- "the things you own will start to own you"
|
Posted By: 74SkiNautique
Date Posted: August-24-2008 at 2:48pm
Thats what my dad said. So we will run a new wire to the ground for the tank, this way, we cant die out on the lake!
------------- 74SkiNautique
|
Posted By: MdFooter
Date Posted: August-28-2008 at 1:47am
It wouldn't happen out on the lake, it would happen when you refuel. Same reason why aircraft are grounded three ways during refueling operations.
BL: cheap insurance to run a new wire.
------------- KP 1st http://www.correctcraftfan.com/diaries/details.asp?ID=2723&yrstart=1981&yrend=1985" rel="nofollow - 85 Nautique 2nd
|
Posted By: eric lavine
Date Posted: August-28-2008 at 4:47pm
good insurance if you dont!!
------------- "the things you own will start to own you"
|
Posted By: 74SkiNautique
Date Posted: August-28-2008 at 11:09pm
Yea, when i install the tank tomorrow, ill run a wire over to the ground of the tank. I have to redrill my filler neck holes anyway, so one will have a nut on the end where i can put it!
------------- 74SkiNautique
|
|