need a RH 351 ford
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=12064
Printed Date: November-19-2024 at 10:16am
Topic: need a RH 351 ford
Posted By: footinmuppet
Subject: need a RH 351 ford
Date Posted: September-29-2008 at 10:41am
|
Hi People, I'm in need of a 351 ford engine, either a long block or complete motor minus the transmission. Any leads would be a great help. Thanks, Mark
|
Replies:
Posted By: footinmuppet
Date Posted: September-29-2008 at 7:12pm
|
Hi again. I need a LH 351 not a RH. sorry for the bad typing. Thanks, Mark
|
Posted By: Fl Inboards
Date Posted: September-30-2008 at 4:28pm
Where are you at and at what stage do you want a motor? Long block, short block, complete, new, used or rebuilt? I have over 10 351 motors will build you one or sell you a running used one.
Thanks
Jody
-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
1993 Shamrock "fat" 20. 2008 Nautique 196 5.0
|
Posted By: footinmuppet
Date Posted: September-30-2008 at 10:42pm
|
I'm in PA. I have all the components from a 351 except the block. I'd like to purchase a long block or a complete runnng engine. Thanks,Mark
|
Posted By: JMurph
Date Posted: March-14-2009 at 1:22pm
I am also in need of a long OR short block. I would prefer a short block, but would consider a long block with the right specs.
Does anyone know of a good source? I've checked some of the online folks, but not knowing their operations and none being close to where I am, I don't know who to trust. Has anyone bought a block recently, that could recommend an outfit.
Mark,
Did you find what you were looking for?
Jody,
What's up with your inventory? Do you still have some stuff sitting around?
Thanks for any help.
-------------
|
Posted By: JMurph
Date Posted: March-14-2009 at 1:28pm
Followup:
Basic specs I'm looking for are as follows:
GT-40p heads
Edelbrock Intake
Cam = Not sure, but I think a close to stock would be ok, but I need to check.
Standard pistons are ok (Flat?)
-------------
|
Posted By: gun-driver
Date Posted: April-07-2009 at 6:41pm
muppet,
Are you still looking for the LH 351 if so Erics got a LH Pro Boss for sale.
|
|