Pump weep hole/ temp reading
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1268
Printed Date: December-04-2024 at 3:32pm
Topic: Pump weep hole/ temp reading
Posted By: Guests
Subject: Pump weep hole/ temp reading
Date Posted: March-01-2005 at 3:20am
|
Noticed water seeping from my pump on my 64 american skier when I had garden hose hooked up....Is that normal? also when it idles out out the water the temp gauge seems to move but quickly goes to full hot? I shut engine down, block head and exhaust not even warm to the touch. Is it possible the water is not getting up to that part of the manifold creating a hot spot? Is air in the system a problem like cars? thx in advance
|
Replies:
Posted By: Tim D
Date Posted: March-01-2005 at 12:01pm
You need a new seal kit, which keeps water from reaching the bearing at the front. If it's a brass sherwood pump, aqua power makes a seal kit for it.
-------------
Tim D
|
|