1988 Seat Measurements
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=12695
Printed Date: November-17-2024 at 10:16am
Topic: 1988 Seat Measurements
Posted By: bokaeser
Subject: 1988 Seat Measurements
Date Posted: January-17-2009 at 8:42pm
|
My project boat was missing some seat parts when I found it. So I'm going to have fabricate some things.
What I need (deluxe interior only): Back seat measurents of the bottom three seat cushions and the middle seat back Observer seat bottom two peices. Were these peices originally wood? |
Replies:
Posted By: SNobsessed
Date Posted: January-17-2009 at 11:06pm
|
Mine ('89) has the rotocast bases. But the staple boards of the cushions are plywood, I believe. Do you want the measurements off them? Height, width, length I presume? There is alot of contour there, so I don't think I could transer enough info for you to build exact duplicates. If you are going for 'will fit' I think I can help, let me know.
------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: bokaeser
Date Posted: January-17-2009 at 11:40pm
|
yes if you could help that would be great.
any measurements you think would help to duplicate the originals A sketch would work best. But if you dont have a scanner that would not be possible. |
Posted By: SNobsessed
Date Posted: January-17-2009 at 11:44pm
|
Do you want just the plywood base footprint or the entire elevation contour of the foam? I think I misunderstood your project. Are you just replacing the plywood,& re-using the foam & skins? ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: bokaeser
Date Posted: January-18-2009 at 12:11am
|
actually need it all.
no skins no plywood no foam. I did get the two outside back rotocast and the observer rotocast but not the middle back portion |
Posted By: SNobsessed
Date Posted: January-18-2009 at 1:01am
|
I will take some photos tomorrow & put some dimensions to them. I think you have a long way to go to make these entirely from scratch. ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: bokaeser
Date Posted: January-18-2009 at 2:45am
|
yes, maybe, but whats the alternative?
I have a ballast box that I used last year in the back but this year we have a little one to tote along. Need more space. |
Posted By: SNobsessed
Date Posted: January-18-2009 at 5:33pm
|
bokaeser - Here you go. My son was very patient in teaching me how to photoshop the dimensions in.
#1 & 2 Rear cushion 
#3 Rear Backrest 
#4 & 5 Observer cushion 
#6 & 7 Observer Bolster 
#9 Rear bolster, L vs. R are symetrically opposite, same lip profile as the others.  ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: bokaeser
Date Posted: January-19-2009 at 12:45am
|
Great work!!
I think you got me covered. I'll buy you a beer if your ever in Nashville |
Posted By: MI-nick
Date Posted: January-20-2009 at 12:19pm
|
i have an '88 with a "custom" back seat. i have the original rear seats (frame and cushions) sitting in my garage collecting dust...would you be interested?? ------------- As far as I can tell, I'm not quite sure... |
Posted By: bokaeser
Date Posted: January-20-2009 at 1:20pm
|
Yes very interested
Call me at 6154916795 or email at boandamberlee@gmail.com |
Posted By: MI-nick
Date Posted: January-21-2009 at 11:26am
|
i sent you an email this morning. i can't access that email at work...sooo...if you reply, and I don't reply back, that's why... ------------- As far as I can tell, I'm not quite sure... |
Posted By: bokaeser
Date Posted: January-21-2009 at 11:39am
| I replied to the email |
Posted By: MI-nick
Date Posted: January-21-2009 at 12:52pm
|
ok, i'll check it tonight. ------------- As far as I can tell, I'm not quite sure... |