Where to find custom cover 68??
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=12970
Printed Date: September-29-2024 at 7:29pm
Topic: Where to find custom cover 68??
Posted By: Spievy
Subject: Where to find custom cover 68??
Date Posted: March-04-2009 at 3:34pm
I live in northern Indiana and am trying to find a good place that could make a custom cover for my 68 Mustang. All I seem to be able to fing online is the type that has straps and I need one that has snaps and is made for the boat. Any help is appreciated.
------------- 1968 Mustang 318 CM
|
Replies:
Posted By: TRBenj
Date Posted: March-04-2009 at 3:56pm
Posted By: Spievy
Date Posted: March-06-2009 at 3:28pm
Are snaps bad?
------------- 1968 Mustang 318 CM
|
Posted By: TRBenj
Date Posted: March-06-2009 at 3:39pm
Snaps themselves arent bad, but I HATE putting holes in my boat when it can be avoided. I would consider a nice fitting custom cover with a drawstring.
-------------
|
Posted By: Tim D
Date Posted: March-06-2009 at 9:30pm
I've always used a ski tique cover on my mustang, it's a little big, but it works.
------------- Tim D
|
Posted By: 8122pbrainard
Date Posted: March-06-2009 at 9:55pm
Spievy wrote:
Are snaps bad? |
Yes unless you like the looks of snaps on the hull sides. Plus, as long as you are having a custom cover made. I recommend to have it made at least to the water line or even better to the chines. If outside, it will keep the UV from attacking the hull.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: 86BFN
Date Posted: March-06-2009 at 11:57pm
Joel, are you any where near Angola?
Angola Canvas does my cutoms covers. they are reasonable and do good work. (Straps on mine too)!
------------- 👣 Steve http://www.correctcraftfan.com/diaries/details.asp?ID=4057&sort=&pagenum=1&yrstart=1986&yrend=1986" rel="nofollow - 86 Barefoot Nautique
89 Martinique Former Owner: 93 Hydrodyne 350 MAG
|
Posted By: Spievy
Date Posted: March-07-2009 at 2:51am
86 Yeah, I am in Fort Wayne. That is where the boat primarily is at in the summer's. What lake are you on up there??
------------- 1968 Mustang 318 CM
|
Posted By: Spievy
Date Posted: March-07-2009 at 2:56am
Also as far as the cover. I have buttons (snaps) all the way around right under the lip of the edge. I may need to dock the boat in the water up to a week at times and cannot get under it to pull drawstrings tight and what not. So I wanted to get a replacement cover for it. I already have one with the straps for trailering and setting out of the water as well. And yes, I do have a float and bilge.....
------------- 1968 Mustang 318 CM
|
|