Taking on Water
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=13280
Printed Date: November-17-2024 at 1:37pm
Topic: Taking on Water
Posted By: okyknot
Subject: Taking on Water
Date Posted: April-08-2009 at 6:05pm
|
Greetings,
I have owned a 1981 Ski Natique since 1985. It is taking on water, never really had a problem with this except when propeller shaft needed re-packing. I have done this, but water is still coming in. Sitting and running. Any ideas where to look? Thanks in advance! Dan ------------- H2O is the essence of life. |
Replies:
Posted By: Luchog
Date Posted: April-08-2009 at 6:55pm
|
have you checked the rudder packing?
------------- http://www.correctcraftfan.com/diaries/details.asp?ID=2095" rel="nofollow - 1980 Ski Nautique Commander 351W |
Posted By: okyknot
Date Posted: April-08-2009 at 7:04pm
|
No,
I actually have a mechanic at the marina looking into it. I will suggest that to him. I started keeping the boat at a dry storage marina. The mechanic there thought he solved the problem last year. Would not be so bad except I get back to the docks after closing time and leave the boat in the water overnight. They lift it out the next morning. Afraid too much water will get in ------------- H2O is the essence of life. |
Posted By: bkhallpass
Date Posted: April-08-2009 at 7:06pm
|
Exhaust hoses, shaft, or rudder would seem the most obvious choices. BKH ------------- Livin' the Dream |
Posted By: kapla
Date Posted: April-08-2009 at 7:06pm
|
Also check bolts of the strut and rudder assy... mine had water entrance due to loose bolts. I had to remove them sealed with 5200 like product and adjusted them. now no morewater through there. The only thing its a two man job as one need to hold the nut to prevent it to spin loose while adjusting the bolt....
------------- <a href="">1992 ski nautique |
Posted By: kapla
Date Posted: April-08-2009 at 7:12pm
I donīt know year of your boat but a automatic bilge pump swith will help until you solve the problem. When did auto bilge became standart? ------------- <a href="">1992 ski nautique |
okyknot wrote:Posted By: okyknot
Date Posted: April-09-2009 at 3:08am
|
I am also going to put in an auto bilge pump.
I have a manual one, need to install a new switch with auto pump. Yes I was wondering if the rudder assembly may be the source of water. Is there some sort of gasket between the metal plate and boat. What is 5200? ------------- H2O is the essence of life. |
Posted By: 8122pbrainard
Date Posted: April-09-2009 at 9:55am
|
Dan,
5200 is a 3M polyurethane adhesive sealant. Great stuff! Is sticks to almost anything and remains slightly flexable. NO silicone!!! One clue to where the water is coming from. If the water is warm then it's exhaust hoses. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: eric lavine
Date Posted: April-09-2009 at 10:22am
|
when they lift the boat with water in it, look for the leak out, if it doesnt leak its a high leak, hose, or something to that nature ------------- "the things you own will start to own you" |
Posted By: skicat
Date Posted: April-09-2009 at 11:02am
|
Dan,
You are in Atlanta, what marina do you have it at. There are a couple of us on here close to Lanier if you are up that way. I keep my Crownline at Gainesville drystack. I would be glad to help you look at it to see if we could figure it out. There isn't that many places it can come in. ------------- Greg http://www.correctcraftfan.com/diaries/details.asp?ID=2427&yrstart=1981&yrend=1985" rel="nofollow - 86 BFN |
Posted By: eric lavine
Date Posted: April-09-2009 at 12:05pm
|
words just keep popping in my head, foam, rot ------------- "the things you own will start to own you" |
Posted By: Hollywood
Date Posted: April-09-2009 at 2:04pm
|
Take the boat out of the water, fill the bilge with *some* water. Watch to see where it leaks out, work backwards. ------------- |
Posted By: gun-driver
Date Posted: April-09-2009 at 4:13pm
| Happened to my '85. Ended up being the mufflers developed pin hole leaks. They just wore out over time. |
Posted By: DeepCreekNauti
Date Posted: April-10-2009 at 8:07pm
|
Check the Speedo tubes behind the gas tank. They can break due to age or exposure to freezing.
|
Posted By: okyknot
Date Posted: April-11-2009 at 1:32am
|
Speedo tubes are new.
Turns out it is the exhaust pipes according to my mechanic. Evidently they have some pin holes in them, but at the waterline. Explains why it seems to take on water running (maybe more) and sitting. For now an automatic bilge pump. I'll keep an eye on it. Thanks to all! Dan ------------- H2O is the essence of life. |
Posted By: TheSpleen
Date Posted: April-11-2009 at 2:46am
I used a piece of fiberglass tape to cover the holes in my muffler. Seems to be working well. |