Print Page | Close Window

Breakerless ignition conv Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=13438 Printed Date: November-17-2024 at 2:48pm Topic: Breakerless ignition conv Posted By: lonestar Subject: Breakerless ignition conv Date Posted: April-23-2009 at 10:54am I have a breakerless ignition conversion coming from skidim this week. I am planning on installing it over the weekend. Anyone have advice on doing so. My mechanical exp is at an amateur level so if I should find a shop to do the work thats fine but Id rather attempt it myself. I also bought the coil that they said I should install at the same time. Any helpful info would be great.    ------------- lonestar Replies: Posted By: nuttyskier2002 Date Posted: April-25-2009 at 8:46am Lonestar the kit should come with wiring instructions and they are pretty easy to follow. While you're inside the distributor make sure the mechanical advance operates freely and also check the shaft/bushings for excessive wear. Some here would recommend just buying a new breakerless distributor. If you run into any problems this weekend write back. Good luck! --Brian ------------- 95 Malibu Echelon w/Mercruiser 350 Magnum Skier Former boats: 88 Ski Centurion Tru Trac II 59 Chris Craft Capri (woody) Posted By: lonestar Date Posted: April-25-2009 at 10:03am Thanks Brian. ------------- lonestar

Print Page | Close Window