Print Page | Close Window

Floor Braces not lining up Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=13785 Printed Date: November-17-2024 at 4:53pm Topic: Floor Braces not lining up Posted By: Skinut Subject: Floor Braces not lining up Date Posted: May-26-2009 at 3:50pm My cross brases that go from the primary stringer to the secondary stringer will not line up with the floor line! ?? The boat is on the trailer and is not supported by jacks. Have any of you that have removed the floor from your boat had this problem? Should the boat be supported by jacks? I did jack the boat up on the port side and the gap closed slightly by not completely. I dont want to put too much stress on the boat trying to close the gap. I will post a few pics to help describe my problem. ------------- "A bad day on the water is better than a good day at work" Replies: Posted By: eric lavine Date Posted: May-26-2009 at 10:32pm pics will help. ------------- "the things you own will start to own you"

Print Page | Close Window