Parting out 90' Brendella/351W
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=14299
Printed Date: April-23-2025 at 12:43am
Topic: Parting out 90' Brendella/351W
Posted By: stimie02
Subject: Parting out 90' Brendella/351W
Date Posted: July-05-2009 at 9:02pm
I know this is not a Correct Craft as I am a proud owner of an 89' 2001 so not to much abuse please but I have a 1990 Ski Brendella with a PCM 351w engine that I will be parting out. The boat still has a lot of good parts on it including the: propeller, shaft, shaft mount, rudder assembly, tracking fins, dive platform (not shown in pictures) with slide on bracket mounts, fuel cell, steering controls, speedos,wakeboard tower, bimini top, holley 4BBL carb, pretty much everything but the transmission. I will also be parting out the block so let me know what you need. The trailer will also be for sale.
 ------------- Bro Stimie |
Replies:
Posted By: OverMyHead
Date Posted: July-06-2009 at 2:09am
|
how much for those valve covers? autiodave@hotmail.com ------------- For thousands of years men have felt the irresistible urge to go to sea, and many of them died. Things got better after they invented boats. 1987 Ski Nautique |
Posted By: athhud
Date Posted: July-06-2009 at 10:13pm
|
If the engine cover hinges or seat brackets are the same as those of a 2001, then I'd be interested in a pair. ------------- Andrew |
Posted By: snapperscrapper
Date Posted: July-07-2009 at 5:20pm
|
how much for the carb,raw water pump? do they need work? thanks ------------- snapperscrapper |
Posted By: stimie02
Date Posted: July-08-2009 at 10:01am
|
Valve Covers - $100
Engine cover Hinge and seat brackets are not the same as in a 2001. Carb. is sold. Raw water pump - $75 could stand to be rebuilt but is presently working. ------------- Bro Stimie |
Posted By: tim777
Date Posted: July-09-2009 at 9:22pm
|
I need the thottle control, but only if it comes with the brackets that hold the cables in place.
Thanks Tim Jaegers tim777@hotmail.com ------------- 1979 Ski Tique (347 stroker) Tim J |
Posted By: Ohio Wildcat
Date Posted: July-10-2009 at 1:18am
|
Hi. How much for the tower? Is the Bimini decent?
Where are you located, ie: City and State? |
Posted By: stimie02
Date Posted: July-10-2009 at 4:41pm
|
Tower and Bimini have already sold. Thasnks for your interest though. ------------- Bro Stimie |
Posted By: almabes
Date Posted: July-10-2009 at 4:44pm
|
How much for the fuel pump? ------------- favorite computer wisdom: net helpmsg 4006 '76 Martinique PCM 351W |
Posted By: stimie02
Date Posted: July-10-2009 at 4:49pm
|
Fuel Pump is $50.00 plus shipping. ------------- Bro Stimie |
Posted By: malibud
Date Posted: July-13-2009 at 10:44am
| how much for the spark arrestor or did that go w/ the carb? |
Posted By: stimie02
Date Posted: July-14-2009 at 5:14am
|
The flame arrestor is a K and N version, not OE, but it is in good shape and I would say $20. plus shipping cost. Thanks for your interest and let me know if you want it. ------------- Bro Stimie |
Posted By: almabes
Date Posted: July-14-2009 at 10:02am
|
Never mind on the fuel pump...Discovered mine works pretty well when I actually have fuel to pump.
Duhhh. Thanks, Anthony ------------- favorite computer wisdom: net helpmsg 4006 '76 Martinique PCM 351W |
Posted By: malibud
Date Posted: July-14-2009 at 10:12am
|
I want the flame arrestor It has the nipple so that I can put the tube from the fuel pump on right ? 4 barrel yes ? just let me know what to do .. my email is dc1298@hotmail.com I need it when you can get it let me know I can send you a check or call 828 242 6181
thanks |
Posted By: crnsuperduty
Date Posted: July-22-2009 at 6:27pm
| how much for the swim board with mounts?? How about the trailer? |
Posted By: stimie02
Date Posted: July-26-2009 at 3:05pm
|
Sorry, swim platform is already sold and the trailer is not for sale. Thanks for your interest though. ------------- Bro Stimie |
Posted By: malibud
Date Posted: July-27-2009 at 10:48am
| What a bout the flame arrestor 828 242 6181 |
Posted By: abehrens
Date Posted: July-27-2009 at 8:04pm
|
Starter?
Alternator?? Distributor??? Thanks! |
Posted By: stimie02
Date Posted: July-29-2009 at 3:23pm
|
The starter and alternator have already been sold. Give me a couple of days to pull the distributor and make sure it is okay then I will take a couple of pictures and post them for you to see. Thanks for your interest. ------------- Bro Stimie |
Posted By: abehrens
Date Posted: July-29-2009 at 3:27pm
| Thanks. Is the motor Standard or Right hand rotation? |
Posted By: pallmer
Date Posted: July-29-2009 at 6:54pm
| What propeller do you have? |
Posted By: stimie02
Date Posted: July-30-2009 at 2:16am
Here are the pictures of the distributor as well as the prop. The distributor has a small amount of rust but turns freely. The prop is also in relatively good shape. The distributor is a Prestolite and the prop is a Michigan 13 X 12 LH rotation. Thanks for your interest.
 ------------- Bro Stimie |
Posted By: 89Ski_Nautique
Date Posted: July-30-2009 at 6:38pm
|
By any chance are the Balance Tubes (unsure where there are located on Ski Brendell but should be located inside the boate near the transom) for the Airguide speedometers working OK? If so how much for the balance tubes? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4577&sort=&pagenum=1 - 1989 Ski Nautique Former Boats: 1988 Dominique 1993 Ski Nautique |
Posted By: stimie02
Date Posted: July-30-2009 at 8:40pm
|
I do still have them and I am pretty sure they are working fine. I already sold the guages but I still have them as well as the tubing and pitots for the outside. Give me a fair price and they are yours. ------------- Bro Stimie |
Posted By: 89Ski_Nautique
Date Posted: August-01-2009 at 12:05am
|
Great thanks for getting back with me on the balancing tubes, I am not very good at estimating what these parts are worth to you. How about you give me a call 407-443-8785 when you get a free minute.
Randy ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4577&sort=&pagenum=1 - 1989 Ski Nautique Former Boats: 1988 Dominique 1993 Ski Nautique |
Posted By: stimie02
Date Posted: August-02-2009 at 2:41pm
|
Latest update. The prop is sold.
Randy, I tried calling you a few times yesterday and left you a message regarding the balance tubes. I will take $25 for the pair plus the cost to ship them. Shipping should be pretty cheap $6 to $8. Let me know if you still need them. Abehrens, do you still need the distributor? Malibud, The flame arrestor is on it's way. Again my thanks. ------------- Bro Stimie |
Posted By: 89Ski_Nautique
Date Posted: August-04-2009 at 2:18pm
|
Count me in for the balance tubes and pickup assembly. I call you today for arrange for payment and shipping.
Thanks, Randy ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4577&sort=&pagenum=1 - 1989 Ski Nautique Former Boats: 1988 Dominique 1993 Ski Nautique |
Posted By: DEF187
Date Posted: August-04-2009 at 10:45pm
|
I am looking for both heads and lower exhaust manifolds. Do you still have them, are you selling them, how much do you want for them, can you email me pics?
Thanks! |
Posted By: abehrens
Date Posted: August-05-2009 at 5:26am
Is it a standard or right hand rotation motor? |
stimie02 wrote:Posted By: stimie02
Date Posted: August-05-2009 at 11:51am
|
DEF187, I would take $350 plus the cost of shipping to you for the heads and lower exhaust manifolds. I will be happy to get you a few pictures but it will probably be Saturday or Sunday before I can get them removed from the block and get pictures. Let me know if you are still interested and want me to do that.
Abehrens, Sorry I thought I answered your question already about it being standard rotation. My bad. ------------- Bro Stimie |
Posted By: DEF187
Date Posted: August-05-2009 at 2:15pm
|
Stimie02, I am vary interested in your parts I have questions though. How many hours? My engine is a Standard Right Hand Rotation is that compatibile with your left hand parts? Where are you located, city?
emial me wards@uwstout.edu |
Posted By: abehrens
Date Posted: August-09-2009 at 3:03pm
|
Don't need distributor anymore. I was able to convert a right hand distributor to std. rotation.
Thanks. |
Posted By: rookie
Date Posted: August-10-2009 at 10:15pm
|
do you have a back seat for it??
if so how much for it? thanks dave ------------- do it right the first time... |
Posted By: stimie02
Date Posted: August-11-2009 at 1:02am
|
The back seat is in less than decent condition. Some of the wood is rotten at the base of it on one side. The upholstery also shows some mildew stains. I would be willing to give it to you if you felt like you could use it and given that you would have to pick it up. I would not attempt to ship it. It would not be worth it. I would be happy to pop off a few pictures if you are still interested though. Just let me know. Thanks for your interest. ------------- Bro Stimie |
Posted By: rookie
Date Posted: August-11-2009 at 1:29am
|
where at in the good ole u.s. of a. are you located?
dave ------------- do it right the first time... |
Posted By: stimie02
Date Posted: August-11-2009 at 2:16am
|
Just outside of Charlotte, NC. ------------- Bro Stimie |
Posted By: 89Ski_Nautique
Date Posted: August-11-2009 at 4:38pm
|
Chris,
Sorry about the delay I finally sent your payment today, please call if you have any questions. Thanks, Randy ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4577&sort=&pagenum=1 - 1989 Ski Nautique Former Boats: 1988 Dominique 1993 Ski Nautique |
Posted By: stimie02
Date Posted: August-19-2009 at 6:02pm
|
Hey Randy,
Just to let you know I have still yet to receive the money. I am hoping that you have yet to still get it out or maybe you got it in the mail later then you said. Regardless as soon as I get it I will get your parts out. Thanks in advance ---- Chris "Bro Stimie" Helbing ------------- Bro Stimie |
Posted By: snapperscrapper
Date Posted: November-04-2009 at 9:57pm
|
DO YOU STILL HAVE THE RAW WATER PUMP FOR SALE? THANKS JASON 407-346-1962 ------------- snapperscrapper |
Posted By: JShank
Date Posted: December-18-2009 at 5:01pm
|
how much you for the prop? ------------- jshankleton@gmail.com Southwind 20 |
Posted By: stimie02
Date Posted: December-18-2009 at 10:42pm
|
Sorry JShank, the prop is already gone. Thanks for your interest though. ------------- Bro Stimie |
Posted By: ros12705
Date Posted: December-20-2009 at 3:49pm
| If you still have the rudder.... i will take it,,, I have a 1983 american sier that i just bought and sheared it off in a turn , possible prior damage.. My friend called me about your rudder.. if fits i will take it,,, can you call me Mie Ross 321 779-9831 |
Posted By: bighill
Date Posted: December-20-2009 at 10:23pm
|
I am interested in the ski post.
Chris |
Posted By: stimie02
Date Posted: December-21-2009 at 2:30am
|
ros12705 ---- The rudder has been sold
bighill ---- Also the ski pylon has been sold as well Thanks for your interest though ------------- Bro Stimie |
Posted By: Air206
Date Posted: December-21-2009 at 3:04am
|
Hey Stimie:
What is still avail.......... a list would be great! Thanks!..  ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: stimie02
Date Posted: December-21-2009 at 5:18am
|
No sweat since the list is short:
Fuel Cell Bow Rails Windshield Trailer ------------- Bro Stimie |
Posted By: BoatGuitar
Date Posted: May-05-2010 at 4:59am
| has the storage cover on the passenger dash side sold? Its the plastic flap on top. |
Posted By: athhud
Date Posted: May-05-2010 at 8:10pm
|
What's the story on the hull? I'm assuming the stringers are shot?
My neighbors have a 1998 Brendella that needs new stringers and they would much rather swap their parts into a hull if they could find one in good condition. ------------- Andrew |
Posted By: stimie02
Date Posted: May-06-2010 at 4:37pm
|
The glove box lid is gone as well as the hull. Sorry. ------------- Bro Stimie |
Posted By: rtsuggs
Date Posted: May-06-2010 at 6:11pm
|
How much for the raw water strainer ? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5143" rel="nofollow - 78 nautique 78 ski nautique SOLD 85 ski nautique |
Posted By: 8122pbrainard
Date Posted: May-06-2010 at 7:16pm
Robbie, Just in case, http://www.mcmaster.com/#98775k48/=6z3ne4 - Mcmaster Carr - $23 clear bowl and available in 1&1/2" pipe size as well. Spec the 20x20 mesh. 
------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: stimie02
Date Posted: May-06-2010 at 8:10pm
|
Raw water strainer is also gone. $23 as indicated above is a good deal. ------------- Bro Stimie |
Posted By: flatfoot
Date Posted: May-24-2010 at 11:22pm
|
dose your brendella have a windsheild and is it curved please say yes and it is curved. ------------- rob sawyer |
Posted By: stimie02
Date Posted: May-25-2010 at 2:39am
|
I do still have the windshield but it is not curved. It is a pass thru for a bowrider. Good luck tracking one down. ------------- Bro Stimie |
Posted By: stimie02
Date Posted: June-01-2010 at 6:16pm
|
Flatfoot,
Is this what you mean by a curved windshield? Each of the pieces are flat. Let me know if this is what you are needing and if you need some dimensions. 
 ------------- Bro Stimie |
Posted By: toscotty74
Date Posted: July-20-2010 at 3:54pm
|
HEY I NEED SOME PARTS OFF YOUR BRENDELLA
PLEASE EMAIL ME AT toscotty74@yahoo.com with contact information Thank you |
Posted By: McKenzie
Date Posted: August-03-2010 at 12:43am
|
I was wondering, do you have any of the steering components left from your Brendella? I need the components from the steering wheel back to the cables. Thanks
McKenzie ------------- McKenzie |
Posted By: davidgaraffa
Date Posted: September-01-2010 at 4:24am
| Does it have a Morse Tilt Steering Bezel/Helm? My 91 Barefoot tilt broke and I don't want to buy all new cable helm assemble.... |
Posted By: stimie02
Date Posted: September-01-2010 at 9:50am
|
The boat is completely gone. I have absolutely nothing left from the boat. ------------- Bro Stimie |
Posted By: EDDIE
Date Posted: December-28-2010 at 1:35am
|
I'M INTERESTED IN THE TRAILER IF YOU STILL HAVE IT AND IT WILL FIT MY BOAT . I HAVE A 1991 NAUTIQUE EXCEL . ------------- EDDIE |
Posted By: Air206
Date Posted: December-28-2010 at 2:00am
|
Eddie -
The Ski Brendella was a very flat-bottomed Direct Drive Boat...... your Excel hull is much deeper V-ed and is a V-Drive so the rear axle is much farther back for an Excel. It will not likely be what you need......... Steve ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: yuanyelss
Date Posted: January-07-2011 at 6:50am
|
Discovered mine works pretty well when I actually have fuel to pump. ------------- http://www.cartier4us.com/Cartier-Pen-5.html - cartier pen refill , http://www.cartier4us.com/Cartier-Rings-7.html - cartier engagement rings |
Posted By: poz
Date Posted: January-13-2011 at 12:45am
|
Are you still selling part from the brendella?
Looking for a steering wheel and ski pylon. Thanks Doug |