Front Observer Seat
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=14329
Printed Date: November-17-2024 at 8:50pm
Topic: Front Observer Seat
Posted By: dsla
Subject: Front Observer Seat
Date Posted: July-07-2009 at 4:18am
Does anyone know what material is used to give the bottom of the observer seat its support under the foam? Mine was broken last week, so the seat is "limp" on one corner. It's a 96 ski nautique. Thanks.
-------------
http://correctcraftfan.com/diaries/details.asp?ID=4418&sort=&pagenum=22&yrstart=1996&yrend=2000 - 1996 Ski Nautique
|
Replies:
Posted By: The Lake
Date Posted: July-11-2009 at 8:54am
dsla,
I have no idea, sorry . . . way to new of a boat for me :) but I thought I would bump this thread a little to see if someone could provide some info.
Chuck
-------------
Walk on Water
www.coldwater.me
http://correctcraftfan.com/diaries/details.asp?ID=775&sort=&pagenum=3&yrstart=1966&yrend=1970 - 69 Ski Nautique
|
Posted By: dsla
Date Posted: July-14-2009 at 2:12pm
I got an email back from Christine's. It is called sentra board and is an expanded pvc material. They have them and are reasonably priced.
-------------
http://correctcraftfan.com/diaries/details.asp?ID=4418&sort=&pagenum=22&yrstart=1996&yrend=2000 - 1996 Ski Nautique
|
Posted By: gun-driver
Date Posted: July-15-2009 at 11:48am
I had the same thing happen on my '95.
I repaired it with loctite two part epoxy. Still holding good as new.
|
|