Print Page | Close Window

Need verification Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=14421 Printed Date: November-30-2024 at 7:48am Topic: Need verification Posted By: gun-driver Subject: Need verification Date Posted: July-12-2009 at 12:32pm I'm finally getting around to putting in the "y" fitting for my heater on my '95 GT40 EFI. I am pretty sure the return line I need to disconnect and plug from the motor comes in at the bottom of the motor, below the water pump on that "U" shaped passage. The reason I'm not sure the directions say to plug with a 1/2-MPT plug and mine looks to be 3/8. The line coming off the top of the motor is 1/2 but that has a temp sensor or something on it. Its on the trailer and cant run it to see which way the water is going.

Print Page | Close Window