Print Page | Close Window

overheating Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: Common Questions Forum Discription: Visit here first for common questions regarding your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=14575 Printed Date: November-23-2024 at 8:36pm Topic: overheating Posted By: stymie Subject: overheating Date Posted: July-22-2009 at 9:16am i seem to be having a problem with my 87 cc with a 351 pcm. it started running hot over the weekend. i channged the impeller, witch was chuded up. it still running up to 200 degrese at an idle.so i took out the thermostat and it runs at 140. is it ok not to run a thermostat? im going to put in a new 140 stat in it today.also it allways ran at 180 with a 140 stat in it. could it be the cuculator pump. thanks. Replies: Posted By: SNobsessed Date Posted: July-22-2009 at 10:22am Stymie - You might hsve air leaks in the water lines or strainer. Search for 'Bucket test' on this site & see if the raw water pump sucks down a 5 gallon bucket. You also may have chunks of impeller in your thermostat housing. It is not good to run without a t'stat. The manufacturer would have left them out (if it wasn't needed) as a cost reduction! ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin

Print Page | Close Window