Grease fitting on rudder
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=15010
Printed Date: November-17-2024 at 10:38pm
Topic: Grease fitting on rudder
Posted By: fb_rider
Subject: Grease fitting on rudder
Date Posted: August-20-2009 at 12:50pm
|
On my 1994 Ski Nautique, there is a grease fitting on the rudder assembly under the gas tank. Should that be greased with regular grease? I don't remember my older Nautique having that fitting. Thanks for your input! ------------- 2004 Super Air Nautique Team Edition 1994 Ski Nautique (sold) 1979 Ski Nautique (sold) |
Replies:
Posted By: 8122pbrainard
Date Posted: August-20-2009 at 6:45pm
|
fb_,
Some of the ports have the fittings but most don't. It wouldn't hurt to give it a couple shots of a marine grade grease. The marine grades are less likely to wash out with the water. Welcome to the site or at least posting. Have you been around for long or have you just found CCfan. Get some pictures and a short story together so you can get it to keith to post in the diaries section. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Riley
Date Posted: August-20-2009 at 7:29pm
|
Be careful not to give it too much grease as you can jam it up. ------------- |
Posted By: fb_rider
Date Posted: August-20-2009 at 8:24pm
Thanks for the welcome. I found the site about a month ago, but have owned 2 Ski Nautiques. I bought a 79 in 1982, and then sold it in 1998 and bought a 1994. So, in 27 years I've only spent 1 week without a Nautique  .
I'll put something together with some pics in the next week or so. Thanks again! ------------- 2004 Super Air Nautique Team Edition 1994 Ski Nautique (sold) 1979 Ski Nautique (sold) |