Print Page | Close Window

Three hours left Carburetor Sale!! Printed From: CorrectCraftFan.com Category: Buy and Sell Forum Name: Boat Parts Wanted Forum Discription: Parts wanted only URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=157 Printed Date: November-24-2024 at 5:07am Topic: Three hours left Carburetor Sale!! Posted By: Danny Subject: Three hours left Carburetor Sale!! Date Posted: February-20-2004 at 11:15pm Check this carb out I need one that fits a 302 Ford. I may find out anyhow as I am the high bidder. Three hours left. Thanks for a quick response. I am going to finish the trade on my 1977 Mustang. Follow link. Thanks to all forthe great advice so far. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2460489107 Replies: Posted By: tryan Date Posted: February-20-2004 at 11:46pm lots-o-bidders. cross reference that # off the mrgasket/holley web site and see what the cfm rating is for that model. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=146&yrstart=1971&yrend=1975 - promo http://www.correctcraftfan.com/diaries/details.asp?ID=192&yrstart=1925&yrend=1970 -    #2 Posted By: reidp Date Posted: February-21-2004 at 12:37am Danny, Buy that carb! That's less than 1/2 price. If you get it and it's too large I'll buy it from you at your cost. It's got vacuum secondaries so it shouldn't kill you if it's little large. If it's a factory Ford Holley, I don't think it's any bigger than a 600, which is a little large for a stock 302, but anywhere else this carb is about $350 to $400. Good luck. ------------- ReidP /diaries/details.asp?ID=231&yrstart=1971&yrend=1975 - 1973 Mustang

Print Page | Close Window