cutlass bearing size
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=15820
Printed Date: November-22-2024 at 7:05am
Topic: cutlass bearing size
Posted By: malibud
Subject: cutlass bearing size
Date Posted: November-14-2009 at 10:21am
I am trying to order a cutlass bearing for my 85 2001 I think the size is 1" x 1.25 od x 4 " is this correct
thanks
|
Replies:
Posted By: 8122pbrainard
Date Posted: November-14-2009 at 10:31am
Dan,
Yes that is the typical size. I'd be real surprised if it wasn't!
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: emccallum
Date Posted: November-14-2009 at 11:58am
|
I have found that the original one is one piece and the replacement is two short pieces. At least the one sold by SKIDIM. Dont let that shock you.
|
Posted By: 8122pbrainard
Date Posted: November-14-2009 at 12:26pm
Some have been having tolerance problems with the two piece. I'd stick with the original 1 piece. Just because our boats are ski oriented, doesn't mean we need to go to Skidim. It isn't the only place to shop plus, they no longer support this site!!!
http://www.jamestowndistributors.com/userportal/show_product.do?pid=12090&familyName=Duramax+Marine+Water+Lubricated+Shaft+Bushings - Traditional cutlass bearing
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
|