service around atlanta
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1584
Printed Date: April-18-2025 at 8:43pm
Topic: service around atlanta
Posted By: hyper1685
Subject: service around atlanta
Date Posted: May-03-2005 at 2:49am
I am in the Atlanta area (Peachtree city) and need a good place to bring my boat for service. Can anyone recommend a good place?
Thanks,
Chris
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=651&sort=&pagenum=1&yrstart=1986&yrend=1990 - My Boat
|
Replies:
Posted By: jameski
Date Posted: May-03-2005 at 11:09am
hyper, The only Correct Craft dealer in our area is Watersports Central in Buford (770) 831-8225. They're a really long haul for service. There's a small place in Newnan called Sewell Marine that used to sell and service Sanger inboard ski boats, so they would have some experience with boats like ours. Their number is (770) 253-7996. I've always done my own service and I get most of my parts through SKIDIM.com and Southeast Correct Craft. If I can help you out give me a yell I'm just down the road.
-------------
current boat
http://www.correctcraftfan.com/diaries/details.asp?ID=1977 - 94 Sport Nautique
previous boat
http://www.correctcraftfan.com/diaries/details.asp?ID=601 - 78 Martinique
|
Posted By: hyper1685
Date Posted: May-03-2005 at 2:26pm
thanks for the help jameski. i have done all of the service myself since ive owned the boat too. i have bad strut brearings that i need to replace, and i didnt want to buy the tool. do you think Sanger inboard in Newnan could do this? are you in peachtree city too? where do you use your boat?
Thanks,
Chris
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=651&sort=&pagenum=1&yrstart=1986&yrend=1990 - My Boat
|
Posted By: scomer
Date Posted: May-04-2005 at 2:56am
Hyper, this may be a little further than you want to travel but Gary at Central Georgia marina in Macon is very good on inboard tow boats(ski nautique, mastercraft, etc.) He does everything from stringers to tune-ups.
They are on lake Tobosofkee.
-------------
SCOMER
|
Posted By: Guests
Date Posted: May-04-2005 at 12:34pm
|
Strut bearings are not too hard to replace. Changed them on a moomba at a freinds transmission shop and all we used were tools he had around there.
|
Posted By: Guests
Date Posted: May-04-2005 at 12:35pm
|
Oh yea, I live in Newnan, I am not sure what tool you need, but you can call me if you would like and I can tell you what we used. Just e-mail me and I'll send you my info.
|
|