Rudder, Tracking fins, drive shaft
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=16034
Printed Date: November-17-2024 at 11:20pm
Topic: Rudder, Tracking fins, drive shaft
Posted By: danno99
Subject: Rudder, Tracking fins, drive shaft
Date Posted: December-11-2009 at 4:54pm
|
Hi all, doing a re-do on a 1979 Ski Nautique and I need a rudder, drive shaft and all three tracking fins. I think the previous owner tried to float the hull on the loading ramp. hahaha
Thanks, Dan |
Replies:
Posted By: lhalliii
Date Posted: December-12-2009 at 12:09am
| Have a rudder & shaft from a Mustang 17 1974 would that work? |
Posted By: Pgaboeing
Date Posted: December-13-2009 at 10:23pm
|
I have all three from a 92ski
Pgaski@hotmail.com |
Posted By: danno99
Date Posted: December-14-2009 at 1:28pm
|
I think the shaft is too short from the Mustang, thanks though.
Dan |
Posted By: danno99
Date Posted: December-14-2009 at 1:31pm
|
Thanks Paul, I sent you a note.
Dan |
Posted By: ros12705
Date Posted: December-20-2009 at 9:38pm
| Hay Dan.... in endevors find a ruder for a 1983 american skier,,, Lost mine in Sat Bch Indian river on the 3 voyage....... I am also looing ,,, I will keep you in mind as well...... 321 779-9831 mike ross |
Posted By: rookie
Date Posted: January-17-2010 at 1:51pm
|
I have all as well for 1980 bfn and am told identical to s.n.
let me know. rookie ------------- do it right the first time... |
Posted By: SS 201
Date Posted: January-20-2010 at 8:56am
| I have a rudder like new for a 81 nautique |
Posted By: cc2001
Date Posted: January-26-2010 at 8:16pm
|
I have all from a 86 SN 2001. ------------- Craig |
Posted By: TRBenj
Date Posted: January-26-2010 at 8:28pm
Craig, I may need 2 fins. I assume yours are perfectly straight? How much are you asking for them? Shoot me an email: TRBenj@gmail.com ------------- |
cc2001 wrote:Posted By: surfer1980
Date Posted: April-30-2010 at 3:00pm
|
Looking for one or two Tracking fins got to have the front one for sure. ------------- Better Late Than Never |
Posted By: surfer1980
Date Posted: April-30-2010 at 3:04pm
|
Your best bet for a shaft is new. I just got mine threw skidim.com ------------- Better Late Than Never |
Posted By: 8122pbrainard
Date Posted: April-30-2010 at 4:51pm
Kris, Not really! Next time, try http://www.mycorrectcraftparts.com/ - my correct parts. They support this site and will be very cost competitive!!! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: surfer1980
Date Posted: April-30-2010 at 5:32pm
|
Either place same price and I will bet that they use the same manufacture Elberts Dayton,OR. ------------- Better Late Than Never |
Posted By: caliwakeboard
Date Posted: June-12-2012 at 12:56pm
|
do you still have tracking fins mpia@intermech.com ------------- nautiques forever |
Posted By: boat dr
Date Posted: June-14-2012 at 12:52pm
WRONG.......CCParts is cheaper and they support this site....  ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |