Print Page | Close Window

Need a stringer measurement. Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=16454 Printed Date: November-18-2024 at 5:26am Topic: Need a stringer measurement. Posted By: bkhallpass Subject: Need a stringer measurement. Date Posted: February-03-2010 at 8:50pm Who can give me a measurement between the primary stringer and the secondary stringer on an 82 Ski Nautique. I drew it out and wrote it down three years ago - in pencil. Needless to say I can't read it anymore. I think the measurement is 7 1/2 inches, but trying to lay it out, that doesn't look right. Need a stringer to stringer measurement without glass. Thanks, BKH ------------- Livin' the Dream Replies: Posted By: 82 Nautique 1 Date Posted: February-03-2010 at 9:40pm Brian. I am nearing completion of my 1988 and it measures 7 3/4" I am quite sure that it would be the same on a 1982. someone else may chime in. I do not know that 1/4" + or - would matter. The critical measurements are the main stringers to keep them centered equally so that your engine cradle and pylon remount correctly. another item of much importance is the final height across the tops. This is why you should level the boat side to side and front to back as much as possible. The floor is the what I went by. Dennis ------------- Original Owner " Dennis" http://www.correctcraftfan.com/diaries/details.asp?ID=4855" rel="nofollow - 1982 Nautique

Print Page | Close Window