1989 Ski Nautique Seat Brackets
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=16911
Printed Date: December-04-2024 at 2:41pm
Topic: 1989 Ski Nautique Seat Brackets
Posted By: Vancouver Matt
Subject: 1989 Ski Nautique Seat Brackets
Date Posted: March-25-2010 at 7:45pm
|
Hello,
I am looking for new or used steel seat brackets for the retractable set that allows access to the bow. I have a 1989 Ski Nautique 2001 Regards, Matthew ------------- Matthew |
Replies:
Posted By: 83ski2001
Date Posted: March-28-2010 at 2:44am
| i have a set from my 83. they are the male/female type. send me an address and u can have them, i dont need them. just donate a few dollars to the site. |
Posted By: Vancouver Matt
Date Posted: March-29-2010 at 5:32pm
|
That is really awesome. Thank you. I will donate some dollars to the site for sure!
Matthew Viney 2776 Granville Street Vancouver, Canada V6H 3J3 ------------- Matthew |
Posted By: Hollywood
Date Posted: March-29-2010 at 6:11pm
|
An 83 wouldn't have the same hardware as an 89.
Matthew, you need the hinges for the observer seat backrest? ------------- |
Posted By: behindpropeller
Date Posted: March-29-2010 at 6:43pm
|
Matt-
I will have a set available in a couple weeks. Tim ------------- |
Posted By: Vancouver Matt
Date Posted: March-29-2010 at 10:39pm
|
Hi Tim,
That's great. Please keep me informed. What State are U in? Regards, Matthew ------------- Matthew |
Posted By: Vancouver Matt
Date Posted: March-29-2010 at 10:41pm
|
Oh 83 is different?
Yes, I need the one's for the observer's seat. Regards, Matthew ------------- Matthew |
Posted By: 83ski2001
Date Posted: March-30-2010 at 2:37am
| OK well if they will work let me know. Feel free to call. 4434970063. Thought I would try to help. Tale care |
Posted By: 89Ski_Nautique
Date Posted: March-31-2010 at 2:33am
|
Hollywood, Do you have a photo of the 'Correct' observer seat hinges?
I have just removed the observer's seat backrest ('89 Ski) during my wet sanding project and noticed I most likely I have some "Jerry Rigged" observer seat hinges. Does any one have a photo of the "correct" observer seat hinges for a late 80's - 1989 Ski Nautique? Randy ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4577&sort=&pagenum=1 - 1989 Ski Nautique Former Boats: 1988 Dominique 1993 Ski Nautique |
Posted By: Hollywood
Date Posted: March-31-2010 at 12:58pm
|
Well I won't be able to snap some pics until the weekend. Post what you have and I'll tell you if it's factory. You might be surprised! ------------- |
Posted By: Bremsen
Date Posted: March-31-2010 at 2:03pm
These are factory 88, should be the same as the 89. Honestly, I'm going to swap them out for a piano hinge, the factory ones are idiotic. They're a pita to use and barely give you enough room to get to anything in the bow. I won't be getting rid of them though, I keep all my factory parts.
 ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=923&sort=&pagenum=3&yrstart=1986&yrend=1990 - Our 88 SN2001 |
Posted By: Hollywood
Date Posted: March-31-2010 at 2:08pm
|
That bottom pic would be a lot better w/o the pylon in it.
I've toyed with the idea of a gullwing conversion like the early 90s but haven't had the time or motivation. The original setup defintely could be improved upon in many ways. ------------- |
Posted By: 83ski2001
Date Posted: March-31-2010 at 10:28pm
|
yeah sorry man i thought u needed the floor brackets the allow the whole seat to flip forward. sorry i couldnt help ya
if anyone does need a set of these brackets, i have 2 sets of them left over. if anyone wants them let me know and just donate a few bucks to the site. thanks |
Posted By: 89Ski_Nautique
Date Posted: April-02-2010 at 4:39pm
|
Hollywood,
Check these out are these the factory observer seat brackets for an '89? I am suspicious since the seat bracker mounting hardware was not stainless steel and the machine screws seemed way too long for through bolt mouting to the bracket(s) and the deck. Thanks. 
 ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4577&sort=&pagenum=1 - 1989 Ski Nautique Former Boats: 1988 Dominique 1993 Ski Nautique |
Posted By: Hollywood
Date Posted: April-05-2010 at 1:13pm
|
Those definitely look original. Perhaps someone changed some of the fasteners along the way, or the factory was running low on their SS supply. The threaded rods on the corner pieces are indeed long. ------------- |
Posted By: Vancouver Matt
Date Posted: April-05-2010 at 4:28pm
|
Hello Tim (Behind Propeller)!
Any news on the seat brackets for the 1989 Ski Nautique? I just received my upholestry back and I'm excited to do the install. Take Care, Matthew ------------- Matthew |
Posted By: behindpropeller
Date Posted: April-05-2010 at 5:03pm
|
Matt-
Shoot me an email. tim.cochrane@gmail.com I will have them made on Monday of next week. Tim ------------- |
Posted By: Vancouver Matt
Date Posted: April-05-2010 at 7:07pm
|
Hi Tim,
The e-mail kept bouncing back to me....twice. Maybe you're in-box is to full? Are you making these pieces up or do you have a set? How much do you want for them and are they the same as the observer's seat brackets on the 1989 Ski Nautique 2001? Regards, Matthew ------------- Matthew |
Posted By: Vancouver Matt
Date Posted: April-08-2010 at 5:40pm
|
Any news Tim? ------------- Matthew |
Posted By: behindpropeller
Date Posted: April-08-2010 at 7:13pm
|
Matt-
I fixed the address. Do you have specific parts you need or the whole assembly. Mine are all bent. I plan on making new ones on our cnc mill. Tim ------------- |
Posted By: behindpropeller
Date Posted: April-08-2010 at 8:27pm
|
If anybody else needs the brackets that attach to the seat back because they are bent please email me tim.cochrane@gmail.com or 330-461-2751
Tim ------------- |
Posted By: a.jones_asu
Date Posted: September-16-2010 at 5:17am
| Hi if anyone know where i could find some seat brackets i would appreciate any info also. I am new to the site and always wanted a ski nautique so i am buying an 83 model this month. the boat had the back seat and the driver seat but i didn't see the pole in the center either. i would like to have that also if anyone knows where to find one or how hard the install would be, maybe some one know someone that does good upholstery work for these boats. like i said any information is appreciated. |
Posted By: SN89Russ
Date Posted: October-18-2017 at 12:45am
|
I recently bought an 89 SN 2001 which is missing the observer seat hardware. Does anyone know the exact measurements of the a brackets, so I can make the pieces needed to mount the back rest? Thanks Russ ------------- Russ |
Posted By: gsmith795
Date Posted: July-08-2018 at 10:46pm
|
Reviving this email chain as my brackets are bending and starting to fail. Anyone have some spares? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7756" rel="nofollow - 1986 Ski Nautique 2001 |