Exhaust mani gasket
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1762
Printed Date: November-22-2024 at 8:55pm
Topic: Exhaust mani gasket
Posted By: Guests
Subject: Exhaust mani gasket
Date Posted: May-30-2005 at 1:56pm
I need to replace the exhaust manifold gasket on one side, between the manifold and the head. I did this last year on the other side of the engine but ordered the whole side gasket, bolt, etc, kit from SkiDim. I'd rather just replace the 3.00 gasket on the other side this time- is this something that can be picked up at an auto parts store, and what should I ask for? I think the shipping at ski dim is actually more expensive than the gasket!
|
Replies:
Posted By: Guests
Date Posted: May-30-2005 at 1:57pm
|
Oh, and the boat- 90 SN, 351.
|
Posted By: Jim_In_Houston
Date Posted: May-30-2005 at 2:25pm
If FelPro makes it, it is OK to use. If they do not make it, use a gasket they do. My 2 cents.
Check to see if Felpro has a Marine gasket for that engine. I suspect they do. I have found tech support at FelPro easy to get in touch with. You should call them and get their part number for the gasket you need. Shop it.
Although, many on this forum probably know the part number.
-------------
Happy owner of a '66 and a '68 Mustang
|
|