Print Page | Close Window

Sherwood Pump Replacement Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1774 Printed Date: November-22-2024 at 8:08pm Topic: Sherwood Pump Replacement Posted By: Siveck Subject: Sherwood Pump Replacement Date Posted: May-31-2005 at 2:41pm My raw water pump on my '75 Nautique has given up. The bearings in the pump are ruined. The impeller that I replaced last summer looks nice, but everything else inside the housing is shot. The shaft is chewed up a little as well. The pump is a Sherwood F75 that mounts on the front of the oil pan. I've noticed that the later model boats have a pump on either side of the front of the motor. Should I rebuild, replace, or upgrade this thing? ------------- 1975 Ski Nautique "Small Letter Boat" Replies: Posted By: Bradley950 Date Posted: May-31-2005 at 3:15pm I would upgrade to the port mounted sherwood just because the parts seem to be more avalible. just my .02 -Brad- ------------- Brad Miller bradley950@yahoo.com

Print Page | Close Window