67 intake manifold
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=178
Printed Date: November-19-2024 at 3:37pm
Topic: 67 intake manifold
Posted By: all7mullins
Subject: 67 intake manifold
Date Posted: February-29-2004 at 6:24pm
HELP!
I have been trying for over a year to locate an intake manifold for my all original 1967 Correct Craft Skylark. She has the Buick 225 cu. in. v-6 with 155 hp converted by Universal Marine. ANY help would be greatly appreciated!
|
Replies:
Posted By: tryan
Date Posted: February-29-2004 at 6:32pm
a derivative of that motor is also used in a few earley 70's amc jeeps. i don't know why , but i have seen a few. rover also used a buick motor, but i think they where v-8's. you might check that route.
you might have to dig up harley earl and ask him.
edit...on the jeep sights, it sounds like the engine configuration changed in 75. jeep bone yards will give you a bingo i'm sure.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=146&yrstart=1971&yrend=1975 - promo http://www.correctcraftfan.com/diaries/details.asp?ID=192&yrstart=1925&yrend=1970 - #2
|
Posted By: reidp
Date Posted: March-01-2004 at 8:47pm
If you haven't checked on this one already, there appears to be one on E-bay, item number 2464093777, which they say was a 2-bbl unit from an early CJ5. The price ain't bad either at a whopping $5. Good luck.
-------------
ReidP
/diaries/details.asp?ID=231&yrstart=1971&yrend=1975 - 1973 Mustang
|
Posted By: Guests
Date Posted: March-02-2004 at 3:00am
|
I had a problem finding Manifolds for a 66 Chrysler 318. I finally got them at Blue Ridge Marine 16809 Hwy99 STE A Lynwood Wa 425 741-8181 ask for Paul Good Luck
|
Posted By: Guests
Date Posted: October-09-2005 at 12:39am
|
Have you found an intake yet? I have a 1966 "SKYLARK" with the V-6 and have my OE 1-barrel intake plus two 2-barrel intakes
|
Posted By: chris philipp
Date Posted: July-20-2006 at 11:25pm
Have lots of skylark parts have what you need call chris (517)812-3680cell first (517)536-8252
-------------
Chris Philipp
|
Posted By: stever67
Date Posted: July-03-2008 at 10:44am
hi i've got a complete 1967 v6 225 air cleaner to oil pan w/ manifolds from a buick skylark auto. i just removed it a year ago and it ran fine. i swapped to a v8. let me know if you interested. i'm located in mpls mn.
-------------
stever
|
|