62 NAUTIQUE PARTS FOR SALE
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1786
Printed Date: November-22-2024 at 5:50pm
Topic: 62 NAUTIQUE PARTS FOR SALE
Posted By: BERTSBOAT
Subject: 62 NAUTIQUE PARTS FOR SALE
Date Posted: June-01-2005 at 11:45pm
|
HAVE A PYLON AND A FEW OTHER PARTS FROM A 1962 NAUTIQUE. LET ME KNOW WHAT YOU NEED AND I WILL SEE WHAT I HAVE IN STORAGE. ------------- BERTSBOAT |
Replies:
Posted By: Guests
Date Posted: June-03-2005 at 11:41am
| Have you got an original steering wheel? If so I'm interested .Thanks .Jim Beville |
Posted By: ryangreta
Date Posted: June-07-2005 at 7:56pm
|
How much for the pylon? Can you email pictures?
rarno@aplusengineering.com Thanks, Ryan ------------- 1996 Ski Nautique 1967 CC Mustang Previously owned '69 Baracuda and '87 Ski |
Posted By: ScottZ
Date Posted: June-17-2005 at 5:43pm
|
Is this boat a Ski Nautique? Do you have the lift rings, bow light, stern light, plaques that say Correct Craft and Ski Nautique? ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: Tonali_III
Date Posted: June-26-2005 at 5:38pm
|
Morse throttle control? ------------- http://correctcraftfan.com/diaries/details.asp?ID=553&sort=&pagenum=1" rel="nofollow - 1974 Southwind 20 <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6752" rel="nofollow">1972 Mustan |
Posted By: Guests
Date Posted: July-01-2005 at 2:56am
| Do you have windwings for windshield? Im also looking for tach? |
Posted By: Guests
Date Posted: July-18-2005 at 2:36am
| looking for windshield, engine cover and back seat. |
Posted By: watty
Date Posted: July-21-2005 at 7:23pm
| I need a waterjacket that will fit a 66 AlTyll Skier (Correct Craft) with a 65 300 cubic inch engine. |
Posted By: pwr1942
Date Posted: August-31-2006 at 10:31pm
| LOOKING FOR FRONT MOTOR MOUNT HOUSING? THANKS PETE |
Posted By: pwr1942
Date Posted: August-31-2006 at 10:39pm
I HAVE A BACK SEAT BACK NEEDS TO BE REFINISDED ALSO HAVE WINDSHIELD WINGS AND BASE THE WINDSHHIELD WAS A CRACK. PETE |
tombo wrote:Posted By: 93/70 ccpb
Date Posted: August-31-2006 at 11:42pm
|
how much for pylon /how long is it,need one for my 1970.thanks dan .email is ccsnpb@sbcglobal.net ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: watty
Date Posted: September-01-2006 at 5:19pm
| I am looking for a waterjacket for a 1966 Correct Craft Alltyl Skier with a 300 cubic inch Buick engine. It is a conversion made by a Revley Corporation. Do you have this or know of where I may find one. Have tried everywhere, even the Correct Craft factory with no luck. Email address is julie_lafoon@hotmail.com |
Posted By: boat dr
Date Posted: September-07-2006 at 12:51pm
|
interested in your pylon,how muchand do you have the attaching hardware,boat dr......1-
318-386-2825 ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: 62 wood
Date Posted: October-18-2006 at 11:16am
|
HELP!! I still need rear prop strut,...anyone? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: Caos56
Date Posted: October-18-2006 at 4:04pm
|
windshiels and motorbox,
Could you send me some pics and a price thx ------------- Billy O'Bryan |
Posted By: ScottZ
Date Posted: October-24-2006 at 8:47am
What boat do you need a strut to fit? I have one. I may also have the windsheild wings too. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: 62 wood
Date Posted: October-24-2006 at 9:13am
|
Scott,
I need it for my 64 American skier. Bad luck earlier this summer...  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: ScottZ
Date Posted: October-25-2006 at 11:30pm
|
I took this one off a 1971 Ski Nautique. It did not fit that boat correctly. If you want to try it, I can send it to you if you will cover the freight. If it does not work for you, you can send it back or buy it if it does work. It will be next week before I know anything on the windwings. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: 62 wood
Date Posted: October-26-2006 at 1:07am
|
Scott,
That sounds ok... or...you dont happen to have a pic of it? I can also get rough dims of mine ( mounting plate size and hole to hole centers,etc) to see if its close? my email is : <kten72@yahoo.com> thanks! Steve ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |