Which one?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=17995
Printed Date: November-18-2024 at 2:20pm
Topic: Which one?
Posted By: mandretta
Subject: Which one?
Date Posted: June-10-2010 at 8:40pm
| I just had the velvet drive rebuilt by fantastic finish marine. Guys are great and really helpful by the way. Their suppliers are out of damper plates, so i need to get one from somewhere else. I have been told a few different things from different people, so I come here to ask the experts. Boat is a 1986 martinique with the 351. Velvet drive 71c is the transmission. http://bpi.ebasicpower.com/c/DAMPERS/Drive+Dampers is it the ALDTA-106 or the ALDTA-106a? Am I way off? Do I need to measure my flywheel? |
Replies:
Posted By: 8122pbrainard
Date Posted: June-10-2010 at 9:27pm
|
http://www.merequipment.com/22617/228716/Transmission-Drive-Plates/80106-Sachs-Drive-Plate.html - Sachs drive dampner plate at Mer equipment
Sachs is the best. No you don't need to measure anything. This is the same dampner plate Eric at FFM uses/recommends. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: horkn
Date Posted: June-10-2010 at 9:48pm
|
LOL, "dampner".
You guys might not find this funny, but this comes up all the time for steering dampers on motorcycles. "Dampner" isn't even a word. http://http://dictionary.reference.com/browse/dampner - http://dictionary.reference.com/browse/dampner Never mind me, I just got a laugh out of it.  ------------- 78 martinique- refloored, reinforced, stringers re glassed, re engineered interior GT40P heads Edelbrock Performer intake acme 4 blade http://img.photobucket.com/albums/v64/horkn/fish/nautique.jpg |
Posted By: kapla
Date Posted: June-11-2010 at 2:44am
|
lets hear what our tranny expert has to say...
btw welcome to the site ------------- <a href="">1992 ski nautique |
Posted By: 8122pbrainard
Date Posted: June-11-2010 at 9:51am
Tom, Do you have the "Wisconsin" accent?  
Well in all my years, I had always heard and called them "dampners"!! Then one day here on CCfan I noticed Eric was calling them "dampers" so I then called them the same. Yesterday I must have had a loss of memory and reverted back to the old spelling. Now, the real name for them is a "drive plate" !!! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
horkn wrote:Posted By: eric lavine
Date Posted: June-11-2010 at 10:18am
|
damper or dampener, i used spell check...I think from here on out I will say damper, or drive plate or torsional drive plate or.......I'll stick to damper plate ------------- "the things you own will start to own you" |
Posted By: MI-nick
Date Posted: June-11-2010 at 11:49am
|
dampner...so it makes something wet?? ------------- As far as I can tell, I'm not quite sure... |
Posted By: 8122pbrainard
Date Posted: June-11-2010 at 12:40pm
I'm not the only one!!
------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: 75 Tique
Date Posted: June-11-2010 at 1:49pm
|
Freddie, use dampner in a sentence.
"Hollywood has a date tonight and his goal is to dampner." ------------- _____________ “So, how was your weekend?” “Well, let me see…sun burn, stiff neck, screwed up back, assorted aches and pains….yup, my weekend was great, thanks for asking.” |
Posted By: horkn
Date Posted: June-11-2010 at 3:37pm
|
Pete, I have an odd accent.
I was born in SE Wisconsin, moved to So Cal at less than 2 years of age, then back to WI until my mid 20's. Then I moved to Maine, and picked up that accent. I have been here in SE WI since then. For years until I moved to Maine I was on the radio as a DJ, and I seriously looked at doing that for a profession. TV and radio stations love to hire Midwesterners, because even if they have an accent, it goes away when they are on. Unless you are from Minnesota, then that "o" drags on too long. LOL ------------- 78 martinique- refloored, reinforced, stringers re glassed, re engineered interior GT40P heads Edelbrock Performer intake acme 4 blade http://img.photobucket.com/albums/v64/horkn/fish/nautique.jpg |
Posted By: horkn
Date Posted: June-11-2010 at 3:38pm
LOL ------------- 78 martinique- refloored, reinforced, stringers re glassed, re engineered interior GT40P heads Edelbrock Performer intake acme 4 blade http://img.photobucket.com/albums/v64/horkn/fish/nautique.jpg |
Posted By: YooperSully
Date Posted: June-11-2010 at 9:05pm
|
In my neck of the woods, it's... Did you almost hit that buoy!?.."Dampner"(damn near), spilt my beer too! ------------- 87' 2001 |