Swim platform location
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=180
Printed Date: November-21-2024 at 2:25pm
Topic: Swim platform location
Posted By: CCraftSkierFan
Subject: Swim platform location
Date Posted: March-01-2004 at 4:08pm
|
I would be interested in any information regarding the placement and fabrication of swim platform brackets, from anyone who has added them to their boat.
Specifically I'd like to see the locations in relation to the centerline of the transom vertically and horizontally. In addition, if anyone has had any custom brackets made, I'd like information on the 2 necessary angles necessary to fabricate the brackets. (since the transom is not 90 degrees vertically and is curved). Feel free to email me directly or send pictures (please label the mail "ccraft info"). Thanks as always, this board is great. Bordshuflr@aol.com ------------- 1975 Correct Craft Skier 16 302 Commander 220HP, towed with a 1989 F250 4x4, 7.3L diesel supercab |
Replies:
Posted By: tryan
Date Posted: March-01-2004 at 5:12pm
|
there is another thread w/links to some bracket makers and mounting provisions. if you tow it, go the the removable type.
you might level the boat in the driveway to get the relative angle of you platform. most hardware stores sell a 5.99 inclinometer. the transom mount on mine is a vertical pin which allows for the curvature of the transom. i like mine right at the waterline at rest with a full tank. your call.  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=146&yrstart=1971&yrend=1975 - promo http://www.correctcraftfan.com/diaries/details.asp?ID=192&yrstart=1925&yrend=1970 - #2 |
Posted By: CCraftSkierFan
Date Posted: March-01-2004 at 8:39pm
|
I did a search and see no other threads on this topic. ------------- 1975 Correct Craft Skier 16 302 Commander 220HP, towed with a 1989 F250 4x4, 7.3L diesel supercab |
Posted By: tryan
Date Posted: March-02-2004 at 12:12am
|
http://www.correctcraftfan.com/forum/forum_posts.asp?TID=105&PN=2 - link ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=146&yrstart=1971&yrend=1975 - promo http://www.correctcraftfan.com/diaries/details.asp?ID=192&yrstart=1925&yrend=1970 - #2 |
Posted By: jcawley3
Date Posted: March-03-2004 at 8:39pm
| I've got all the brackets from a '86 SN if they will work make me an offer jcawley3@yahoo.com |
Posted By: CCraftSkierFan
Date Posted: March-03-2004 at 10:06pm
|
Does anyone know if an 1986 has the same hull design as a 1975? ------------- 1975 Correct Craft Skier 16 302 Commander 220HP, towed with a 1989 F250 4x4, 7.3L diesel supercab |
Posted By: 882001
Date Posted: March-04-2004 at 12:30am
no. 82-89 hulls were the 2001 series ------------- kemah texas http://www.correctcraftfan.com/diaries/details.asp?ID=163&yrstart=1986&yrend=1990 - 1988 skinautique "2001" |
CCraftSkierFan wrote: