Identifying my FCT Model
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=18001
Printed Date: November-22-2024 at 12:49pm
Topic: Identifying my FCT Model
Posted By: scottsims1
Subject: Identifying my FCT Model
Date Posted: June-11-2010 at 2:27pm
|
I recently picked uo an 2005, 206 Air Nautique Limited. The FCT came with a light bar and speakers, but now I want to add Wakeboard Racks. How do I tell what flight control tower model I have? Any clue what the diameter is and if there is a cheaper place than ebay to get racks? I can get them delivered on ebay for about 120 per rack.
|
Replies:
Posted By: quinner
Date Posted: June-11-2010 at 5:39pm
If it looks like the tower on my 05' 206 it would be a Gen 2, really not sure exactly which designation is considered correct, FCT-2 maybe? Believe the dia is 1-7/8". Flight clips (board racks) are what was available through the factory in 05', they work fine but I would imagine you could find some better options out there.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt
|
Posted By: SN206
Date Posted: June-14-2010 at 2:10am
dido
-------------
...those who have fallen and those who will.
|
Posted By: bubbaskier
Date Posted: June-14-2010 at 6:21pm
|
Yep, 1 7/8" is the diameter. If the boat does not have a under the tower bimini you may want to check out the Nautique spinner racks on www.nautiqueparts.com. They are closing them out. They still are not cheep but "buy quality and only cry once".
|
|